Skip to the content
2 layers20 × 128.5 mmSk119-boolean, the printed circuit board in 3D

Sk119-boolean

mirdej/synkie47

The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

Size
20 × 128.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
29
Pads
125
Tracks, vias
301, 38
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Jan 2016
Updated
9 Oct 2026

Overview

Sk119-boolean is an open-source printed circuit board by mirdej, from the mirdej/synkie repository on GitHub. It is a 2-layer board of 20 × 128.5 mm with 45 parts on 29 nets, routed with 301 tracks and 38 vias.

It is built around the LM311D and CD74AC153M96. Its parts include 19 resistors, 8 capacitors, 3 ICs, 2 diodes and 2 switches.

Main components

2

README

README.md

The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann. A bit like the venerable modular Moog synthesizer it lets you toy around with the signal using patch cables – but this time not producing sound but images. It is an instrument for video, a playground, a platform to explore new ways to transform a video signal. Synkie is still in development, we constantly develop new modules – and even the base specifications may still change over time.

Synkie’s main goal is playability not image quality, even though we try to design each module as best as we can. But patching is done with 2mm laboratory cables – not shielded 75Ohm BNC cables as one would normally use for video. No, you can even use any blank wire and tinker around with the signal in real time on the sk90-breadboard module… The laboratory plugs can be stacked, so you can easily divide the signal into multiple paths, feeding multiple modules at once and change the configuration on the fly. The resulting image can get quite messy down the road, but that’s part of the fun, or maybe even the main purpose…

Before building stuff from here yourself - read this:

This Github repository is our working space and not a DIY tutorial. Lots of stuff is completely outdated and/or poorly documented. Here are some important notes about the current state of things (Oct 2021):

  • Pretty much everything in the EAGLE directory is totally obsolete and we only keep it for documentation.

  • We settled on the LMH6643 as our Opamp of choice for almost everything where frequency response matters. Not all schematics reflect this. In most cases if there's an opamp named "generic opamp" or even "LM833" - we probably meant LMH6643.

  • There are several modules where the supply connector is flipped. As we etch a lot of boards ourselves there is no silkscreen and we don't see the error. ALWAYS check the polarity !

  • We live in PAL land. These modules have not beent tested with NTSC video. Some might need to be adapted slightly, some might even work better than here ;-)

If you have any questions contact info@synkie.net

Basics

Synkie Backbone

Modules sk000 to sk009 constitute the Synkie Backbone – handling Ins out Outs to the normal Video World. Input video is clamped (black level = GND) and stripped of timing signals and color burst. This signal can then be fed to any processing modules. In the end , timing signals and a phase corrected color burst is cut back into the modified signal, in sync with the Genlock input.

sk000-power

Power distribution to backbone modules and rack. +5V, GND, -5V.

sk001-genlock-in

This module takes any standard video signal as input and generates all necessary timing signals for the Synkie system. The input is first backporch-clamped to GND and all active video is cut off. This black image can serve as a genlock for connected sources (cameras). Colorburst is output as a seperate signal and used to syncronise a quartz crystal that generates a continuous 4.4336Mhz subcarrier signal for the rgb modules. A LM1881 generates the digital sync signals: horizontal sync, vertical sync, backporch and odd/even.

sk002-input

This modules takes any standard video signal, clamps black level to GND and strips off synctips and colorburst. (still in active debate: me thinks sk002 should apply a gain of 1.43 to bring the 0.7V white level up to 1V)

sk003-output

This module takes any signal as its input (from DC to 10Mhz). The scale-bias section controls amplitude and dc-shift. The signal is then clipped hard between 0V and 1V. Finally the resyncer adds synctips and colorburst to make it look like a standard video signal. When using video as an input to the sk003 any processing beforehand can add some tiny delay - depending on how many modules the signal passes through - which causes a phase shift in the signal that can alter or completely destroy color. That is why the burst signal from sk001 first goes through a sk004-burstshift (allpass filter) that lets correct the phase error before it gets cut back into the video signal.

Synkie Signals

Terminology

Signal nameWaveformDescriptionSpecs
GenlockA video signal that serves as the master synchronisation signal. Can be routed through and used as an input.-0.3V to 0.7V
VideoStandard PAL video signal-0.3V to 0.7V
SyncDigital sync pulses: H-Sync, V-Sync, Backporch, Odd/Even0V to 5V
BurstColorburst only, AC coupledca. -0.1V to 0.1V
SiffSynkie signal. Can be anything, DC, CV, Audio or Video. 0V means black. 1V means white-1V to 1V

The SIFF signal

Synkie's goal is to be able to mix all signals, be it control signals, audio or picture. You should be able to use a video image as control voltage for a VCO like you should be able to inject a sound into the video or watch a steady 0.256 volts.

  • Siff signals are DC coupled. 0V means black. 1V means white.
  • Siff signals can still be negative, meaning superblack or substracting signals !
  • Siff signals can be loud - going beyond 1V and below -1V. The sk003-output module will finally limit the signal to 0-1V.
  • Siff signals can range from DC (0Hz) to ca. 10Mhz

This has the following implications for synkie modules:

  • All module inputs should be high-impedance, DC coupled and ESR protected.
  • All module outputs should be low-impedance and DC coupled.
  • Whenever possible a module's bandwidth should be at least 4Mhz
  • Sensible CV range should be between 0V and 1V.
  • But: Modules must be able to cope with voltages as low as -5V to as high as 5V
  • Gate signals are 0V to 1V !!
  • So: trigger inputs should trigger at around 0.5V ! Use comparators.

Parts

45
QtyValueFootprintReferences
104k7Resistor_SMD:R_0603_1608MetricR2, R6, R8, R9, R12, R13, R14, R15, R16, R17
6100Resistor_SMD:R_0603_1608MetricR3, R4, R5, R11, R18, R19
4100nsynkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C3, C4, C9
43,17/1,1synkie_frontplate_footprints:Banana2mm-LöthülseIn1, In2, OUT1, OUT2
2100nsynkie_footprints:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderC5, C6
210usynkie_footprints:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC2, C8
247kResistor_SMD:R_0603_1608MetricR1, R10
2BAT54S-L44synkie_footprints:SOT-23D1, D6
2Ferrite_BeadInductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolderFB2, FB3
2LM311Dsynkie_footprints:SOIC-8_3.9x4.9mm_P1.27mmIC1, IC2
2SW_DIP_x04synkie_frontplate_footprints:CFS-0403TB-Bottom-EntrySW1, SW2
1clipboard:1dd75c43-08ba-4e54-ac6a-8d954e368d0b
11k8Resistor_SMD:R_0603_1608MetricR7
1500Potentiometer_SMD:Potentiometer_Bourns_3314J_VerticalRV1
1CD74AC153M96Package_SO:SOP-16_4.4x10.4mm_P1.27mmU1
1Housingsynkie_frontplate_footprints:Frontplate_20mmN1
1Supplyanyma_footprints:smd-3pinJ10
1TestPointTestPoint:TestPoint_Pad_D2.5mmTP1

More from mirdej/synkie

12
  • 4 layers104.3 × 106.8 mmSk162-herd mixer, the printed circuit board in 3D

    Sk162-herd mixer

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    223 parts47
  • 4 layers100 × 95 mmSk612-delay, the printed circuit board in 3D

    Sk612-delay

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    166 parts47
  • 2 layers99 × 70.7 mmBuilding blocks, the printed circuit board in 3D

    Building blocks

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    165 parts47
  • 2 layers107.4 × 34.6 mmSk801-rgb, the printed circuit board in 3D

    Sk801-rgb

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    139 parts47
  • 2 layers76 × 76 mmSk030-matrix, the printed circuit board in 3D

    Sk030-matrix

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    135 parts47
  • 2 layers101 × 107 mmSk730-cv sequencer, the printed circuit board in 3D

    Sk730-cv sequencer

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    132 parts47
  • 4 layers41.9 × 98.4 mmSk101-inAndOut, the printed circuit board in 3D

    Sk101-inAndOut

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    124 parts47
  • 2 layers54 × 80 mmSk245-oscar vcf vca, the printed circuit board in 3D

    Sk245-oscar vcf vca

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    103 parts47
  • 2 layers29 × 97 mmSk502-vco triple, the printed circuit board in 3D

    Sk502-vco triple

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    92 parts47
  • 2 layers20 × 128.5 mmSk128-divide, the printed circuit board in 3D

    Sk128-divide

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    91 parts47
  • 4 layers45.8 × 69.5 mmMicrosynkie, the printed circuit board in 3D

    Microsynkie

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    84 parts47
  • 2 layers74.4 × 30.8 mmSk003-output, the printed circuit board in 3D

    Sk003-output

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    83 parts47

Similar boards

  • 4 layers82 × 82 mmCpu3, the printed circuit board in 3D

    Cpu3

    SpaceScienceSweden/ulv_electronics

    Root electronics repo

    151 parts1
  • 2 layers65 × 48 mmBarePi PidiMet, the printed circuit board in 3D

    BarePi PidiMet

    Panda381/BarePi

    Modular Microchip Kit

    44 parts4
  • 2 layers30 × 61.3 mmModuleV440, the printed circuit board in 3D

    ModuleV440

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    45 parts1.1k
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    45 parts517GPL-2.0
  • 2 layers49.8 × 88.9 mmLDG WING FOLD PLACARD, the printed circuit board in 3D

    LDG WING FOLD PLACARD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    45 parts431
  • 2 layers26.5 × 34.4 mmPicoLoaderNSB, the printed circuit board in 3D

    PicoLoaderNSB

    makeo/PicoLoader

    A cheap and easy to install modchip for the Nintendo GameCube!

    45 parts320GPL-2.0
  • 2 layers40.2 × 19 mmOMGS3 Carrier R1, the printed circuit board in 3D

    OMGS3 Carrier R1

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    45 parts296

Questions

How big is the Sk119-boolean PCB?

It measures 20 × 128.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sk119-boolean use?

45 parts, built around the LM311D and CD74AC153M96. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sk119-boolean KiCad files?

From the mirdej/synkie repository on GitHub, at the commit this page was made from: the board is kicad/sk119-boolean/sk119-boolean.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sk119-boolean design in my own project?

Its repository states no licence, so its author keeps all rights: ask mirdej before reusing the design.