

Buttons
internet-connected led sign control system
- Size
- 89.6 × 35.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 21
- Pads
- 65
- Tracks, vias
- 38, 2
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Dec 2018
- Updated
- 6 Nov 2026
Overview
Buttons is an open-source printed circuit board by mincrmatt12, from the mincrmatt12/MSign repository on GitHub, published under the MIT licence. It is a 2-layer board of 89.6 × 35.3 mm with 16 parts on 21 nets, routed with 38 tracks and 2 vias.
It is built around the PB-22E86C and RKJXV1224005. Its parts include 5 switches, 4 resistors, 2 capacitors and 1 connector. It belongs with the lEDs and displays boards and the ESP8266 and STM32 boards of this library.
Main components
2README
README.mdMSign
Code + designs for an LED sign display board powered by an STM32 and ESP8266. Make sure you clone the submodules.
Organization
board: schematics and PCB layoutstm: STM32 firmware (drives the display)stmboot: STM32 bootloaderesp: ESP8266 firmware (grabs information from the internet)espweb: ESP8266 web-based configuration page sourcecfgserver: Server for shipping unattended config and software updates (without using the webui)bmap: Tools for generating graphics resourcescaplog: Tools for debuggingvendor: Various dependencies in source form (everything not listed below)sim: Stubs/shims for running theespandstmcodebases under linux.
Dependencies
- A recent
arm-none-eabi-gccinstallation (suitably modern to deal with C++20; GCC 14 is what's tested) - A
xtensa-lx106-elf-gccthat can deal with C++20; preferably version 13.2.0 (which was available at one point in debian)- A suitable newlib/libstdc++ archive is available in
Dockerfile.build
- A suitable newlib/libstdc++ archive is available in
- Python 3 and the packages in
requirements.txt- If you aren't building the
espwebdirectory you do not require thecryptographypackage listed
- If you aren't building the
- OpenOCD (for flashing)
- If you have PlatformIO installed we use its OpenOCD by default, so you may not need to install it system-wide.
- CMake (version 3.13 or later is recommended)
quilt, to apply the patches invendorfor the ESP8266 SDK
and everything checked out in the vendor directory. The ESP8266 SDK also usually requests you have python (specifically system python, whatever runs from python) installed with it's requirements (vendor/ESP8266_RTOS_SDK/requirements.txt)
A Docker file with these is provided as Dockerfile.build.
For building the espweb you also need:
- yarn
- node
A Docker file with these is also provided as Dockerfile.webbuild
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | easyeda2kicad:JLCPCB-ToolingHole | , , , | |
| 4 | 12k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 4 | PB-22E86C | easyeda2kicad:SW-TH_6P-L8.45-W8.45-P2.50-LS5.5-BL | SW1, SW2, SW3, SW4 |
| 2 | 47nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Horizontal | J1 |
| 1 | RKJXV1224005 | easyeda2kicad:SW-TH_RKJXV1224005 | SW5 |
More from mincrmatt12/MSign
1- 4 layers136.3 × 71.1 mm

Similar boards
- 2 layers100 × 100 mm

UINIO Keyboard
uinika/UINIO-Keyboard
a Multi-Functional input module, includes Keyboard, Rocker, Rotary Encoder.
112 parts2 - 2 layers176.8 × 101 mm

- 2 layers100 × 112.5 mm

Macropad
gustavorubim/field13-macropad
FIELD 13: DIY programmable macropad with joystick, rotary encoder, editable CAD, electronics, firmware, and visual build documentation.
45 parts - 2 layers118 × 59 mm

- 2 layers30 × 36 mm

TransDIP alps-27800
iwax2/kicad-TransDIP_alps-27800
Translate 2-axis Joystick ALPS RKJXV1224005 as DIP package in 2-axis Joystick #27800
5 parts - 2 layers172.6 × 70.1 mm

Joy Controller V2
Merlin2LmmL/Joy-Controller
A custom made Stream deck Like Handheld Controller that can switch modes and supports quick actions and game movement. PCB and 3d Printed Parts custom made.
78 partsMIT - 2 layers100 × 71 mm

3mode controller
nguterresn/3mode-controller
This versatile hardware controller is designed to seamlessly integrate with a variety of wireless communication protocols, making it an ideal choice for hobbyist projects, DIY electronics, and prototyping.
37 parts - 4 layers114 × 95.1 mm

Questions
How big is the Buttons PCB?
It measures 89.6 × 35.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Buttons use?
16 parts, built around the PB-22E86C and RKJXV1224005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buttons KiCad files?
From the mincrmatt12/MSign repository on GitHub, at the commit this page was made from: the board is board/buttons/buttons.kicad_pcb and its schematic board/buttons/buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buttons design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).