Skip to the content
2 layersJeeNode, the printed circuit board in 3D

DoMini - Home automation @ Ausne

Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
16
Pads
93
Tracks, vias
154, 13
Pours
2
Routed
Yes
KiCad
KiCad 3
Created
26 Oct 2024
Updated
1 Dec 2024

Overview

JeeNode is an open-source printed circuit board by minbiocabanon, from the minbiocabanon/DoMini_Ausne repository on GitHub. It is a 2-layer board with 32 parts on 16 nets, routed with 154 tracks and 13 vias.

It is built around the MAX1724EZK33+T, SHT11 and BSS84. Its parts include 11 resistors, 8 connectors, 7 capacitors, 2 ICs and 2 transistors.

Main components

3

README

README.md

DoMini_Ausne

DoMini - Home automation @ Ausne

Parts

32
QtyValueFootprintReferences
522KSM0805R4, R7, R8, R10, TH1
3100nFSM0805C1, C2, C4
210KSM0805R1, R9
2510KSM0805R2, R3
2BSS84SOT23Q1, Q2
2TSTHole_1mmP7, P8
1100RSM0805R5
1100nFSM1210LC7
110nFSM1206C3
110uFSM1206POLC5
110uHSM1210L1
11uFSM1210LC6
131RSM0805R6
1CONN_2PIN_ARRAY_2X1P6
1CONN_3X2pin_array_3x2P5
1LEDLED-0805D1
1MAX1724EZK33SOT23-5U1
1PORT1PIN_ARRAY-6X1P1
1PORT2PIN_ARRAY-6X1P2
1PORT3PIN_ARRAY-6X1P3
1PORT4PIN_ARRAY-6X1P4
1SHT11sht11-SHT11U2

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers45 × 58.2 mmOpentama, the printed circuit board in 3D

    Opentama

    Sparkr-tech/opentama

    An open-source reference design for MCUGotchi

    65 parts237
  • 2 layers98.5 × 59.8 mmNeuron, the printed circuit board in 3D

    Neuron

    giant-axon/lu.i-neuron-pcb

    Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…

    90 parts73CERN-OHL-S-2.0
  • 6 layers100 × 70 mmSa800u baseboard hw, the printed circuit board in 3D

    Sa800u baseboard hw

    antmicro/snapdragon-845-baseboard

    https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

    616 parts70Apache-2.0
  • 2 layers75 × 40 mmPicoTop Board Rev2, the printed circuit board in 3D

    PicoTop Board Rev2

    7west/PicoTop

    A very basic computer & OS based on the RP2350 microcontroller

    86 parts66
  • 4 layers50 × 59 mmKapula, the printed circuit board in 3D

    Kapula

    tejeez/geckokapula

    EFR32-based handheld transceiver

    166 parts65
  • 6 layers150 × 100 mmNV Meter rev b, the printed circuit board in 3D

    NV Meter rev b

    curtisseizert/Nanovoltmeter

    A low noise nanovoltmeter design files and code

    552 parts44

Questions

What parts does the JeeNode use?

32 parts, built around the MAX1724EZK33+T, SHT11 and BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the JeeNode KiCad files?

From the minbiocabanon/DoMini_Ausne repository on GitHub, at the commit this page was made from: the board is periphs/station_meteo/PCB/V1/JeeNode.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the JeeNode design in my own project?

Its repository states no licence, so its author keeps all rights: ask minbiocabanon before reusing the design.