
24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.

Grow R503 to FeatherWing
R503toFeather is an open-source printed circuit board by MimoCAD, from the MimoCAD/R503toFeather repository on GitHub, published under the MIT licence. It is a 2-layer board with 4 parts on 29 nets, routed with 41 tracks and 1 via.
Its parts include 2 resistors and 1 connector.

| # | R503 Pro Wire Color | Name | PIN # | Pin Name | Notes |
|---|---|---|---|---|---|
| 1 | $${\color{red}RED \space Wire}$$ | Power | 3V3 | $${\color{red}3V3}$$ | 3.3 Volts (Top Left Of Feather). |
| 2 | $${\color{black}BLACK \space Wire}$$ | GND | GRD | $${\color{black}GND}$$ | Ground (Right Under 3.3 Pins). |
| 3 | $${\color{yellow}YELLOW \space Wire}$$ | TXD | 01 | $${\color{green}RX}$$ | TX on R503 <> RX on the Feather. |
| 4 | $${\color{green}GREEN \space Wire}$$ | RXD | 00 | $${\color{yellow}TX}$$ | RX on R503 <> TX on the Feather. |
| 5 | $${\color{blue}BLUE \space Wire}$$ | Wakeup | 02 | $${\color{BLUE}SDA}$$ | Finger Detection (Pulled High). |
| 6 | $${\color{white}WHITE \space Wire}$$ | Touch | 3V3 | $${\color{red}3V3}$$ | 3.3 Volts (Top Left Of Feather). |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0R | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A1 |
| 1 | MX1.0 6P | Connector_JST:JST_SHL_SM06B-SHLS-TF_1x06-1MP_P1.00mm_Horizontal | J1 |

joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MimoCAD/R503toFeather repository on GitHub, at the commit this page was made from: the board is R503toFeather.kicad_pcb and its schematic R503toFeather.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).