2 layers151.6 × 63.5 mm
2 layers30.5 × 45.4 mm
Diodes
mimeiners/elkHSB B.Eng. ET M 5.3
- Size
- 30.5 × 45.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 5
- Pads
- 34
- Tracks, vias
- 16, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Sep 2022
- Updated
- 2 Nov 2026
Overview
Diodes is an open-source printed circuit board by mimeiners, from the mimeiners/elk repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 30.5 × 45.4 mm with 17 parts on 5 nets, routed with 16 tracks and 0 vias.
Its parts include 2 diodes and 1 resistor.
README
README.mdHSB Fak. 4 ET B.Eng. M 5.3 Elektronik (ELK)
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | GND1, GND2, GND3, GND4, OUT-1, OUT-3 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_Coaxial | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | IN2, OUT-2, OUT-4 |
| 1 | 10 Ohm | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Jumper1 |
Questions
How big is the Diodes PCB?
It measures 30.5 × 45.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Diodes use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Diodes KiCad files?
From the mimeiners/elk repository on GitHub, at the commit this page was made from: the board is files/kicad/Diodes/Diodes.kicad_pcb and its schematic files/kicad/Diodes/Diodes.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Diodes design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from mimeiners/elk
2- 2 layers40.6 × 65.7 mm
Similar boards
- 2 layers50 × 35 mm
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
