
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

BotBuddy is a remote-controlled tank platform developed to explore embedded systems, motor control, and wireless communication.
Exercisefour milanhp2 is an open-source printed circuit board by milanpatel9, from the milanpatel9/bot-buddy repository on GitHub. It is a 2-layer board of 53.3 × 40.6 mm with 14 parts on 40 nets, routed with 114 tracks and 6 vias.
Its parts include 1 resistor and 1 inductor. It belongs with the STM32 boards of this library.
BotBuddy is a remote-controlled tank platform developed to explore embedded systems, motor control, and wireless communication. Built from the ground up in 2023, this project integrates real-time control, sensor feedback, and a mobile input interface to create a responsive robotics experience.
Created as a 2023 personal robotics project to gain hands-on experience with embedded hardware, robotics design, and mobile interfacing.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | Cout1, Cout2, Cout3, Cout5, COutReset1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Power_Input1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | I2C1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | Receiver1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | USBSerialPort-TTLAdapter1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | L298N1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | STLinkV2Programmer1 |
| 1 | R2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | STM32L031K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | STM1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | PushButton1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 53.3 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the milanpatel9/bot-buddy repository on GitHub, at the commit this page was made from: the board is botbuddy-pcb/exercisefour_milanhp2.kicad_pcb and its schematic botbuddy-pcb/exercisefour_milanhp2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask milanpatel9 before reusing the design.