2 layers
TP Integrador
Amalia-O/TDCE
FIUBA - Electrónica - Taller de Diseño de Circuitos Electrónicos - Trabajo Integrador
39 parts
2 layers103 × 93 mm
Smart home
milanovviktorio/SPRO1Electronics Semester project 1
- Size
- 103 × 93 mm
- Copper layers
- 2
- Thickness
- 1.55 mm
- Parts
- 54
- Nets
- 56
- Pads
- 154
- Tracks, vias
- 216, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Oct 2024
- Updated
- 29 Dec 2024
Overview
Smart home is an open-source printed circuit board by milanovviktorio, from the milanovviktorio/SPRO1 repository on GitHub. It is a 2-layer board of 103 × 93 mm with 54 parts on 56 nets, routed with 216 tracks and 2 vias.
It is built around the BC547C and BC547. Its parts include 22 resistors, 7 transistors, 7 switches and 1 capacitor. It belongs with the home automation and IoT boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdSPRO1
Electronics Semester project 1
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 300 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R8, R9, R13, R15, R19, R24 |
| 6 | BC547C | Package_TO_SOT_THT:TO-92_HandSolder | Q1, Q2, Q6, Q7, Q8, Q9 |
| 4 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV1, RV3B1, RV3G1, RV3R1 |
| 4 | 360 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R7, R12, R18 |
| 4 | FD-5WSRGB-A | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | RGB1, RGB2, RGB3, RGB4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1, SW2, SW6, SW9 |
| 3 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R16 |
| 3 | 45k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R11, R14 |
| 3 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW4, SW5, SW7 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20 |
| 1 | 4.7µF | Library:CAPPRD200W45D500H500 | C1 |
| 1 | 52 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17 |
| 1 | 7.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 9V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_HandSolder | Q3 |
| 1 | Fan | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | LDR03 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | R23 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | LCD_20x1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | HC–SR505PIR1 |
Similar boards
- 2 layers213 × 65.1 mm
- 2 layers81.9 × 62.5 mm
Lapse O Matic PCB
curiouselectric/Lapse-O-Matic
This is code, PCB and enclosure design for an ESP32_CAM based wildlife camera
40 parts44 - 2 layers300 × 53 mm
BMW E30 VFL SI Board
FabianGmeiner/BMW_E30_SI_Board
Reverse engineering and improving the BMW E30 service indicator board
112 parts20GPL-3.0 - 2 layers98 × 100 mm
Ladderfilter
sebastianbeyer/KOSMO_ladderfilter
KOSMO Version of the Kassutronics Transistor Ladderfilter
67 parts8 - 2 layers58.4 × 33.7 mm
Kenwood tnc
PhilmacFLy/kenwood-tnc
Simple TNC PCB to use a radio with a kenwood ptt connector with a pc to do packet radio
12 parts3 - 2 layers83.7 × 91.6 mm
BMW E30 Early Cluster EG
Ansel84/BMW-E30-Gauge-Cluster-Early-Model
This project is the documentation of reverse engineering the BMW E30 gauge cluster for pre 1988 model years.
49 parts2MIT - 2 layers99.7 × 41.9 mm
Questions
How big is the Smart home PCB?
It measures 103 × 93 mm and has 2 copper layers, 1.55 mm thick.
What parts does the Smart home use?
54 parts, built around the BC547C and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smart home KiCad files?
From the milanovviktorio/SPRO1 repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/smart home/smart home.kicad_pcb and its schematic Hardware/PCB/smart home/smart home.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smart home design in my own project?
Its repository states no licence, so its author keeps all rights: ask milanovviktorio before reusing the design.