Skip to the content
2 layers90 × 32 mmSensor2, the printed circuit board in 3D

3-phase brushless DC motor controller

Size
90 × 32 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
9
Pads
14
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
2 Feb 2022
Updated
16 Feb 2022

Overview

Sensor2 is an open-source printed circuit board by milan-simanek, from the milan-simanek/3-bldc repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 32 mm with 6 parts on 9 nets.

It belongs with the robots and motor control boards of this library.

README

README.md

3-bldc

3-phase brushless DC motor controller

Features:

  • controls 3-phase BLDC motor
  • synchronization using opto-sensors

Arduino peripherals usage:

  • Timer0 - PWM
  • Timer1 - generic timer, phase detection
  • PB0:5 - phase output
    • PB0: phase 1 - high
    • PB1: phase 2 - high
    • PB2: phase 3 - high
    • PB3: phase 1 - low
    • PB4: phase 2 - low
    • PB5: phase 3 - low
  • PC0/PCINT8 - ~FAULT - overcurrent detection
  • PC3/ADC3 - output current measurement
  • PD0:1 - serial communication
  • PD2/INT0 = (zero angle = home position) detection (triggered by both edges)
  • PD3/INT1 = step sensor A
  • PD4 = step sensor B
  • PD5 = OC0B = PWM output

Issues:

  • opto-sensor feedback is currently amplified by operating amplifiers. Unfortunately, these devices should operate on higher voltage, so amplification is not so stable and produces flicking. Solution: signal from opto-sensors should be amplified and conditioned by CMOS invertor based schmitt trigger.

TODO:

  • rotation feedback could be derived from back-EMF.
  • maximum speed, acceleration measurements
  • use avrm modules for usart communication and text formating (comf)

Parts

6
QtyValueFootprintReferences
1optoConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1outputConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2

The 2 most common of 6 parts.

More from milan-simanek/3-bldc

2
  • 2 layers85 × 85 mmPower, the printed circuit board in 3D

    Power

    milan-simanek/3-bldc

    3-phase brushless DC motor controller

    59 partsMIT
  • 2 layers90 × 32 mmSensor, the printed circuit board in 3D

    Sensor

    milan-simanek/3-bldc

    3-phase brushless DC motor controller

    42 partsMIT

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the Sensor2 PCB?

It measures 90 × 32 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sensor2 use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sensor2 KiCad files?

From the milan-simanek/3-bldc repository on GitHub, at the commit this page was made from: the board is circuit/sensor2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sensor2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).