Skip to the content
2 layers49.7 × 49.9 mmDoorbellsensor, the printed circuit board in 3D

circuit to detect doorbell chime for a 3-wire, 4-wire, or 5-wire intercom

Size
49.7 × 49.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
6
Pads
18
Tracks, vias
37, 2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Mar 2026
Updated
30 Jun 2026

Overview

Doorbellsensor is an open-source printed circuit board by mikepii, from the mikepii/3wire-intercom-doorbell-sensor repository on GitHub. It is a 2-layer board of 49.7 × 49.9 mm with 7 parts on 6 nets, routed with 37 tracks and 2 vias.

It is built around the EEU-EB1H220SH and G5V-1-DC5. Its parts include 1 capacitor, 1 diode, 1 connector and 1 switch.

Main components

2

README

README.md

Circuit (KiCad project) to detect door chime or warble tone from a IA543, PK543A, or similar apartment intercom amplifier. To be wired in parallel with apartment intercom.

Inputs: X and 1 from intercom.

Outputs: dry contact relay (normally-open and normally-closed terminals), e.g. for detection by a Shelly smart switch.

Mounting: three holes for DIN rail mounting bracket Phoenix Contact 1201578.

You can order the PCB from a fabricator such as OSH Park by uploading the zip of gerber/drill files (see Releases on GitHub). You can also order it fully assembled from fabricators providing assembly service by sending them the Bill of Materials (BOM) file along with that zip.

Based on information from this post by Chris Whong. This board provides the same functionality as the discontinued Alpha Communications RY014B.

front

back

Development notes

Panelize with KiKit:

sh
kikit panelize \
    --layout 'hspace: 0.5mm; vspace: 0.5mm; cols: 2' \
    --tabs 'type: fixed; vcount: 4; hcount: 4' \
    --cuts 'type: mousebites' \
    $(pwd)'/doorbellsensor.kicad_pcb' $(pwd)'/panelized/doorbellsensor_panelized.kicad_pcb'

Parts

7
QtyValueFootprintReferences
11N4003Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
122 uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
1G5V-1-DC5Relay_THT:Relay_SPDT_Omron_G5V-1K2
1Screw_Terminal_01x05TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_HorizontalJ1

The 4 most common of 7 parts.

Similar boards

  • 2 layers125.1 × 95.9 mmF68K IO, the printed circuit board in 3D

    F68K IO

    kunichiko/FPGA-X68k-DE0CV-IO

    FPGA X68000 I/O Board for DE0-CV

    74 parts10
  • 4 layers75.6 × 96.4 mmSDL, the printed circuit board in 3D

    SDL

    KbeDemy/Sturing-en-detectie-van-lampen

    Dit is een PCB project voor ELTAKO (30VAC)

    152 parts
  • 2 layers65 × 45 mmDB20G Interface, the printed circuit board in 3D

    DB20G Interface

    lernin2doit/DB20-G-APP

    Connect your Android phone to your DB20-G wirelessly over Bluetooth — program channels, manage repeaters, key PTT, and stream live audio, all from a beginner-friendly interface designed around real GMRS community…

    52 partsMIT
  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k

Questions

How big is the Doorbellsensor PCB?

It measures 49.7 × 49.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Doorbellsensor use?

7 parts, built around the EEU-EB1H220SH and G5V-1-DC5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Doorbellsensor KiCad files?

From the mikepii/3wire-intercom-doorbell-sensor repository on GitHub, at the commit this page was made from: the board is doorbellsensor.kicad_pcb and its schematic doorbellsensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Doorbellsensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask mikepii before reusing the design.