4 layers102.2 × 74.4 mm
Controller pcb
chevalierid/alan-setup
Materials for experimental setup examining the effects of artificial light at night on insects
62 parts2
4 layers67.5 × 96.6 mm
BasicSTM32
MikeMcPherson/BasicSTM32F3Basic STM32F3 board for testing and development
- Size
- 67.5 × 96.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 32
- Pads
- 273
- Tracks, vias
- 198, 129
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Mar 2021
- Updated
- 10 Sep 2021
Overview
BasicSTM32 is an open-source printed circuit board by MikeMcPherson, from the MikeMcPherson/BasicSTM32F3 repository on GitHub, published under the MIT licence. It is a 4-layer board of 67.5 × 96.6 mm with 67 parts on 32 nets, routed with 198 tracks and 129 vias.
It is built around the TPSM53604RDAR, LD39100PU33R and SI2374DS-T1-GE3(ES), with the 25SVPF27MX, CRCW040210K0FKEDC and CRCW04022K49FKEDC among its other parts. Its parts include 28 capacitors, 13 resistors, 13 connectors, 4 diodes and 3 ICs. It belongs with the STM32 boards of this library.
Main components
11
TPSM53604RDAR
B3QFN-15(5x5.5)-40℃~+105℃@(TA) 1 1.4MHz 1V~7V 24uA 3.8V~36V 4A Adjustable Buck Buck Built-in Yes B3QFN-15(5x5.5) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
LD39100PU33R
DFN-6(3x3)-40℃~+125℃@(Tj) 1 1A 3.3V 400mV@(1A) 5.5V 50uA 65dB@(1kHz) 85uVrms Fixed PG Pin、Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SI2374DS-T1-GE3(ES)
SOT-23SOT-23 MOSFETs ROHSElecSuperMOSFETs
25SVPF27MX
SMD,D5xL5.9mm-55℃~+105℃ 2.45A@100kHz 25V 27uF 5.9mm 5000hrs@105℃ 5mm Polarized Polymer ±20% SMD,D5xL5.9mm Polymer Aluminum Capacitors ROHSPanasonicPolymer Aluminum Capacitors
CRCW040210K0FKEDC
0402-55℃~+155℃ 10kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountCRCW04022K49FKEDC
0402-55℃~+155℃ 2.49kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountDFE201612P-R33M=P2
080628mΩ 3.9A 330nH ±20% 0806 Power Inductors ROHSMurataPower Inductors
ERJ3RSFR10V
06030ppm/℃~+300ppm/℃ 100mW 100mΩ Current Sense Resistor Surface Mount ±1% 0603 Current Sense Resistors / Shunt Resistors ROHSPanasonicCurrent Sense Resistors / Shunt Resistors
NX3225GD-8MHZ-EXS00A-CG04874
SMD3225-2P-40℃~+150℃ 500Ω 8MHz 8pF ±20ppm ±50ppm SMD3225-2P Crystals ROHSNDKCrystals
TC2050-IDC-NL
Connector for plug-of-nails programming cableTag ConnectUncategorised
USB3131-30-0230-A
插件-55℃~+85℃ 1 1A、1.8A 30V 5P Black Female Micro-B Through Hole USB 2.0 Plugin USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdBasicSTM32F3
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C8, C10, C11, C12, C15, C16, C21, C23, C25, C27 |
| 9 | 1u | Capacitor_SMD:C_0603_1608Metric | C7, C9, C13, C19, C20, C22, C24, C26, C28 |
| 4 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4, J6 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R2, R7, R8 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R10, R12 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 4.3p | Capacitor_SMD:C_0603_1608Metric | C17, C18 |
| 2 | C3216X5R1H106K160AB | SamacSys_Parts:CAPC3216X180N | C3, C4 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J7 |
| 2 | GRM32EC81C476KE15L | SamacSys_Parts:CAPC3225X270N | C5, C6 |
| 2 | LED GREEN | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | SI2374DS-T1-GE3 | SamacSys_Parts:SOT95P237X112-3N | Q1, Q2 |
| 1 | 160 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 1935161 | SamacSys_Parts:1701023 | J1 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 25SVPF27MX | SamacSys_Parts:CAPAE530X600N | C2 |
| 1 | 30 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | ADC1_IN1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | CRCW040210K0FKED | SamacSys_Parts:RESC1005X40N | R3 |
| 1 | CRCW04022K49FKED | SamacSys_Parts:RESC1005X40N | R4 |
| 1 | DAC1_OUT1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | DFE201612P-R33M=P2 | SamacSys_Parts:1286ASH1R0MP2 | L1 |
| 1 | ERJ3RSFR10V | SamacSys_Parts:RESC1608X55N | R1 |
| 1 | Ferrite_Bead_Small | Ferrite_THT:LairdTech_28C0236-0JW-10 | FB1 |
| 1 | GPIO_OUT PB15 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | GRM21BC71E475KE11L | SamacSys_Parts:CAPC2012X145N | C1 |
| 1 | LD39100PU33R | SamacSys_Parts:SON95P300X300X100-7N-D | IC2 |
| 1 | NX3225GD-8MHZ-EXS00A-CG04874 | SamacSys_Parts:NX3225SA25000MSTDCSR6 | Y1 |
| 1 | S4B-PH-KL_LF__SN_ | SamacSys_Parts:S4BPHKLLFSN | J11 |
| 1 | STM32F303VETx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | TC2050-IDC | TC2050-IDC:TAG-CONNECT_TC2050-IDC | J12 |
| 1 | TPSM53604RDAR | SamacSys_Parts:TPSM53604RDAR | IC1 |
| 1 | USB3131-30-0230-A | SamacSys_Parts:USB3131300230A | J13 |
Questions
How big is the BasicSTM32 PCB?
It measures 67.5 × 96.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BasicSTM32 use?
67 parts, built around the TPSM53604RDAR, LD39100PU33R, SI2374DS-T1-GE3(ES) and 25SVPF27MX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BasicSTM32 KiCad files?
From the MikeMcPherson/BasicSTM32F3 repository on GitHub, at the commit this page was made from: the board is kicad/BasicSTM32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BasicSTM32 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers69 × 56.8 mm
- 6 layers110 × 96 mm
Assembly preview
ripclap/rm520n-carrier
KiCad RM520N-GL carrier with 2.5 GbE, passive PoE, dual SIM interfaces and independent LoRa management.
446 partsCERN-OHL-P-2.0 - 2 layers54 × 29 mm
Webasto heater controller
matty337s/Webasto-Heater-WBUS-Controller
Controller for webasto heater used in vehicles such as Land Rover Discovery 3. Used to turn on and off heater using ATTINY microcontroller, with inputs for USB, ignition and low-beam.
39 parts3GPL-3.0 - 4 layers101 × 47 mm
- 4 layers50 × 50 mm
Attentiolight-1-mainboard1
engemil/attentiolight-1-hardware
AttentioLight-1 Hardware
80 parts1CERN-OHL-P-2.0 - 4 layers70 × 109.2 mm
Manafish
Tropaion/Manafish_Mainboard
The Manafish Mainboard is the main electronics board of the Manafish ROV. It replaces the Raspberry Pi 3B, the USB-connected Raspberry Pi Pico and the wiring between them with one board:
127 partsAGPL-3.0 - 6 layers98 × 97 mm
