4 layers126.6 × 37.7 mm
Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT
2 layers96 × 79 mm
NanoRiego
MikeMakes/nanoRiegoPCB- Size
- 96 × 79 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 34
- Pads
- 55
- Tracks, vias
- 45, 0
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Mar 2025
- Updated
- 4 Mar 2025
Overview
NanoRiego is an open-source printed circuit board by MikeMakes, from the MikeMakes/nanoRiegoPCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 96 × 79 mm with 8 parts on 34 nets, routed with 45 tracks and 0 vias.
It is built around the HC-05 and DS1307Z+. Its parts include 3 connectors, 2 resistors and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdnanoRiegoPCB
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 4RelayModule | personal_library:4RelayModule | x4 Relay Module |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | DS1307 | personal_library:DS1307_module | J2 |
| 1 | HC-05 | personal_library:HC-05 | J3 |
| 1 | LOGO | personal_library:qr | G*** |
| 1 | R3.62k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | R7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Questions
How big is the NanoRiego PCB?
It measures 96 × 79 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NanoRiego use?
8 parts, built around the HC-05 and DS1307Z+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NanoRiego KiCad files?
From the MikeMakes/nanoRiegoPCB repository on GitHub, at the commit this page was made from: the board is nanoRiego.kicad_pcb and its schematic nanoRiego.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NanoRiego design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 100 mm
- 2 layers90.9 × 38.4 mm
Snaaur v1
duongngochoan/Self_balancing_robot_PID
Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.
58 parts7 - 2 layers56.8 × 68.6 mm
Emg
leikoilja/muscle-imbalance-detection
A device to assist patients with the rehabilitation of the knee joint after a knee surgery using EMG biofeedback. The device can reliably detect muscle activity and display it in an easy-to-use mobile application.
84 parts6MIT - 2 layers135.8 × 56.1 mm
Power board
xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.
87 parts5GPL-3.0 - 2 layers33 × 58.8 mm
- 4 layers160 × 117.5 mm
- 2 layers
