2 layers24.4 × 24.4 mm
OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
39 parts2.1k
2 layers
Aprs tracker
mik4el/rufs5Collection of hacks and iterative builds for RUFS-1, the satellite to bring Rufs the Space Lion in to space (http://rufsklubben.se/).
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 49
- Pads
- 119
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 6 Dec 2015
- Updated
- 18 Oct 2016
Overview
Aprs tracker is an open-source printed circuit board by mik4el, from the mik4el/rufs repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 39 parts on 49 nets.
Its parts include 21 resistors, 7 connectors, 5 capacitors, 2 diodes and 2 transistors.
README
README.mdrufs
Collection of hacks and iterative builds for RUFS-1, the satellite to bring Rufs the Space Lion in to space (http://rufsklubben.se/).
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistors_SMD:R_0805_HandSoldering | R13, R14, R20, R21 |
| 4 | 1K | Resistors_SMD:R_0805_HandSoldering | R1, R2, R12, R18 |
| 3 | 100K | Resistors_SMD:R_0805_HandSoldering | R3, R8, R11 |
| 2 | 100nF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C3, C4 |
| 2 | 20K | Resistors_SMD:R_0805_HandSoldering | R15, R16 |
| 2 | 2N7002 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 2 | 3K3 | Resistors_SMD:R_0805_HandSoldering | R9, R19 |
| 1 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C5 |
| 1 | 10K | Potentiometers:Potentiometer_Trimmer-Suntan-TSR-3386P | RV1 |
| 1 | 1K 1% | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 1uF | Capacitors_ThroughHole:C_Rect_L7_W4.5_P5 | C1 |
| 1 | 2.5mm Stereo Jack | Pin_Headers:Pin_Header_Straight_1x03 | J2 |
| 1 | 270 1% | Resistors_SMD:R_0805_HandSoldering | R10 |
| 1 | 2K2 1% | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 3.5mm Stereo Jack | Pin_Headers:Pin_Header_Straight_1x03 | J1 |
| 1 | 3K9 1% | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | 4.7K | Resistors_SMD:R_0805_HandSoldering | R17 |
| 1 | 4.7uF | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | C2 |
| 1 | 8K2 1% | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | BAOFENG | Pin_Headers:Pin_Header_Straight_1x04 | P4 |
| 1 | GPS | Pin_Headers:Pin_Header_Straight_1x04 | P5 |
| 1 | POWER | Pin_Headers:Pin_Header_Straight_1x03 | P1 |
| 1 | RADIO | Pin_Headers:Pin_Header_Straight_1x10 | P2 |
| 1 | RX (RED) | LEDs:LED_1206 | D2 |
| 1 | TEMPERATURE | Pin_Headers:Pin_Header_Straight_1x03 | P3 |
| 1 | TX (GREEN) | LEDs:LED_1206 | D1 |
| 1 | arduino_mini | arduino pro mini:ARDUINO_PRO_MINI | U1 |
Questions
What parts does the Aprs tracker use?
39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Aprs tracker KiCad files?
From the mik4el/rufs repository on GitHub, at the commit this page was made from: the board is hacks/aprs_tracker/hardware/v1/aprs_tracker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Aprs tracker design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 33.5 mm
Breakout 48pin 174917-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
39 parts1.2k - 2 layers33 × 26 mm
VL53L1x pwm
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 2 layers43.4 × 18.8 mm
Usb sniffer lite
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
39 parts706BSD-3-Clause - 2 layers40 × 20 mm
ESP8266
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器
39 parts690MIT - 2 layers100 × 70.3 mm
- 2 layers81.3 × 53.3 mm
RGB LED 1.4
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
39 parts429GPL-2.0 - 2 layers65.7 × 44.8 mm
