Skip to the content
2 layers100.4 × 75.6 mmLedPCB, the printed circuit board in 3D

This repository has been created to hold all the files I used to create the instrument's hardware for my F-16 simulator The Arduino part is in seperate repositories, since one Arduino controls more instruments.

Size
100.4 × 75.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
33
Pads
64
Tracks, vias
0, 0
Pours
1
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
8 Jul 2023
Updated
15 May 2026

Overview

LedPCB is an open-source printed circuit board by mihi4, from the mihi4/F-16_Instruments repository on GitHub. It is a 2-layer board of 100.4 × 75.6 mm with 32 parts on 33 nets.

README

README.md

Instruments used in my F-16 Simulator

This repository has been created to hold all the files I used to create the instrument's hardware for my F-16 simulator
The Arduino part is in seperate repositories, since one Arduino controls more instruments. Those repos are linked in the README of each instrument.

Other instruments, once finished, will be added to this list.


ALTIMETER (own repo because added before)



eHSI



RWR



VVI/AOA



HYDPRESS



FQI



EPU FUEL



CautionPanel


!!! Use those files at your own risk !!!

All the files are free to use under the GNUGPLv3

If you find those files useful and would like to support me with an icecream, coffee or pizza, you can use paypal.me to do so ;)
Paypal.me

Parts

32
QtyValueFootprintReferences
32LEDLED_THT:LED_D5.0mmD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16

More from mihi4/F-16_Instruments

3
  • 2 layersX27Mount, the printed circuit board in 3D

    X27Mount

    mihi4/F-16_Instruments

    This repository has been created to hold all the files I used to create the instrument's hardware for my F-16 simulator The Arduino part is in seperate repositories, since one Arduino controls more instruments.

    9 parts6
  • 2 layers79.9 × 32.4 mmEHSI pcb, the printed circuit board in 3D

    EHSI pcb

    mihi4/F-16_Instruments

    This repository has been created to hold all the files I used to create the instrument's hardware for my F-16 simulator The Arduino part is in seperate repositories, since one Arduino controls more instruments.

    5 parts6
  • 2 layers27.9 × 39.4 mmMAX7219Board, the printed circuit board in 3D

    MAX7219Board

    mihi4/F-16_Instruments

    This repository has been created to hold all the files I used to create the instrument's hardware for my F-16 simulator The Arduino part is in seperate repositories, since one Arduino controls more instruments.

    5 parts6

Similar boards

  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    32 parts1kGPL-3.0
  • 2 layers136.8 × 54.2 mmRetropie zero, the printed circuit board in 3D

    Retropie zero

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    32 parts915
  • 2 layersMooltipass top, the printed circuit board in 3D

    Mooltipass top

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    32 parts531
  • 2 layers16 × 20 mmESPKey, the printed circuit board in 3D

    ESPKey

    octosavvi/ESPKey

    Wiegand data logger, replay device and micro door-controller

    32 parts353GPL-2.0
  • 2 layers82 × 40.9 mmDisplay7447, the printed circuit board in 3D

    Display7447

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    32 parts269
  • 2 layers40 × 38 mmShield, the printed circuit board in 3D

    Shield

    murexrobotics/electrical

    Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

    32 parts192MIT
  • 2 layers47 × 39 mmQrss clock tx, the printed circuit board in 3D

    Qrss clock tx

    swharden/AVR-projects

    A collection of standalone AVR projects written in C

    32 parts184MIT
  • 2 layers30.9 × 63 mmStm32-io extend, the printed circuit board in 3D

    Stm32-io extend

    hardenedlinux/cheap-pcb

    Cheap PCB: Better understanding the current status of hardware supply chain

    32 parts170CC0-1.0

Questions

How big is the LedPCB PCB?

It measures 100.4 × 75.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LedPCB use?

32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LedPCB KiCad files?

From the mihi4/F-16_Instruments repository on GitHub, at the commit this page was made from: the board is cautionPanel/electronics/ledPCB/ledPCB.kicad_pcb and its schematic cautionPanel/electronics/ledPCB/ledPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LedPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask mihi4 before reusing the design.