

Pcb mod btn
modulos tarjetas kicad
- Size
- 116 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 105
- Nets
- 38
- Pads
- 211
- Tracks, vias
- 415, 5
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Jun 2018
- Updated
- 20 Jun 2018
Overview
Pcb mod btn is an open-source printed circuit board by miguelitoVargas, from the miguelitoVargas/seqExplora repository on GitHub. It is a 2-layer board of 116 × 100 mm with 105 parts on 38 nets, routed with 415 tracks and 5 vias.
Its parts include 30 connectors, 11 resistors and 10 capacitors. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
README
README.mdseqExplora
modulos tarjetas kicad
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | , , , , , , , , , , , , , , , +34 | |
| 5 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C6, C7, C8, C9, C10 |
| 5 | 10K | Resistors_SMD:R_0805_HandSoldering | R1, R3, R5, R7, R9 |
| 5 | 1K | Resistors_SMD:R_0805_HandSoldering | R2, R4, R6, R8, R10 |
| 5 | CP | Capacitors_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2, C3, C4, C5 |
| 5 | leds_1 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J1, J2, J3, J4, J27 |
| 5 | leds_4 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J13, J14, J15, J16, J29 |
| 5 | leds_5 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J18, J19, J20, J21, J30 |
| 4 | leds_2 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J8, J9, J10, J28 |
| 1 | 240ohm | Resistors_SMD:R_0805_HandSoldering | R11 |
| 1 | Pot_1 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J23 |
| 1 | Pot_2 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J24 |
| 1 | btn_1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J5 |
| 1 | btn_2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | btn_3 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J12 |
| 1 | btn_4 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J17 |
| 1 | btn_5 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J22 |
| 1 | ldes_2 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J7 |
| 1 | led_3 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J11 |
| 1 | main_controller | Pin_Headers:Pin_Header_Straight_1x11_Pitch2.54mm | J26 |
| 1 | power | Connectors_Terminal_Blocks:TerminalBlock_bornier-4_P5.08mm | J25 |
The 101 most common of 105 parts.
More from miguelitoVargas/seqExplora
1- 2 layers116 × 100 mm

Similar boards
- 2 layers228.4 × 85 mm

LeChiffre
tominabox1/Le-Chiffre-Keyboard
Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com
105 parts183GPL-3.0 - 2 layers27.9 × 101.6 mm

MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT - 2 layers146.1 × 118.8 mm

Apiaster
nmunnich/apiaster
Apiaster is a 50 key keyboard designed to be cheap, adjustable, and upgradeable.
105 parts118 - 2 layers63 × 81 mm

EspLora
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
105 parts94BSD-3-Clause - 2 layers70.5 × 100.2 mm

AS3397 proto SMS
PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer
105 parts88MIT - 2 layers265.6 × 436 mm

Ahokore
dezlidezlidezli/ahokore
Ahokore is a 36-key one-piece split keyboard, with full wireless functionality.
105 parts84 - 2 layers30.5 × 42.2 mm

3bpV2Plus RevB
zaxour/TripleBypassV2Plus
Variant of Tian Feng's Triple Bypass V2 with fixes and functionality added
105 parts81 - 2 layers248.3 × 99.8 mm

Questions
How big is the Pcb mod btn PCB?
It measures 116 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb mod btn use?
105 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb mod btn KiCad files?
From the miguelitoVargas/seqExplora repository on GitHub, at the commit this page was made from: the board is modulo_botones/pcb_mod_btn.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb mod btn design in my own project?
Its repository states no licence, so its author keeps all rights: ask miguelitoVargas before reusing the design.