
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Simple Arduino Nano based pseudorandom Eurorack module
Answertainty is an open-source printed circuit board by MiguelDeTrool, from the MiguelDeTrool/answertainty repository on GitHub. It is a 2-layer board of 43.2 × 100.3 mm with 30 parts on 48 nets, routed with 129 tracks and 3 vias.
Its parts include 15 resistors, 7 capacitors, 5 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Simple Arduino Nano based pseudorandom Eurorack module

Answertainty creates pseudorandom signals. It is inspired by NLC's Sloths, and Bogaudio's Walk. I must warn anyone attempting this that I have not tested these exact PCBs, only an earlier prototype, that I then made minor modifications to for this version. I am quite confident that they will work, and feel free to send me a message if you decide to try this out.
The "Gate" output changes to 0v or 5v randomly. The further the pot is turned right, the more frequently it changes state.
The "Slow" outputs create slowly evolving continuous control voltages, from about -5v to +5v. The further the pot is turned right, the faster it evolves.
The "Fast" output does the same as the "Slow" outputs, but responds to the pot in the opposite direction.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.0001 | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2, C3, C4, C5 |
| 4 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4 |
| 4 | AudioJack2_SwitchT | PJ302M:PJ302M | J1, J2, J3, J4 |
| 3 | 1000 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R11, R12, R13 |
| 3 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5, R6, R7 |
| 3 | 5K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R8, R9, R10 |
| 2 | 100n | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C6, C7 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R14 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R15 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 43.2 × 100.3 mm and has 2 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MiguelDeTrool/answertainty repository on GitHub, at the commit this page was made from: the board is hardware/main pcb/answertainty.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MiguelDeTrool before reusing the design.