
MB PCB ControladorESP32
Miguel-Barcelos/Electronics-Projects
Este repositório contém projetos de eletrônica, incluindo circuitos eletrônicos, simulações e design de PCBs.

Este repositório contém projetos de eletrônica, incluindo circuitos eletrônicos, simulações e design de PCBs.
MB PCB SHIELD is an open-source printed circuit board by Miguel-Barcelos, from the Miguel-Barcelos/Electronics-Projects repository on GitHub. It is a 2-layer board of 82.9 × 99.7 mm with 55 parts on 55 nets, routed with 375 tracks and 26 vias.
It is built around the DHT11, LM324 and TCRT5000, with the L7812, SI4459ADY and BC548 among its other parts. Its parts include 23 resistors, 10 ICs, 6 connectors, 5 capacitors and 5 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Este repositório contém projetos de eletrônica, incluindo circuitos eletrônicos, simulações e design de PCBs.
O objetivo principal deste trabalho é
/data: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/src: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/project: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/figures: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R9, R11, R12, R15, R17, R19, R21, R23 |
| 8 | 470R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R10, R13, R14, R16, R18, R20, R22 |
| 4 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D3, D4, D5 |
| 4 | TCRT5000 | TCRT5000:TCRT5000_VIS | U9, U11, U12, U13 |
| 2 | 10K | Potentiometer_THT:Potentiometer_ACP_CA9-H2,5_Horizontal | RV1, RV2 |
| 2 | 470K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3 |
| 2 | 470uF 35V | Capacitor_SMD:CP_Elec_4x5.3 | C2, C3 |
| 2 | A4950E | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U7, U8 |
| 1 | 0.1uF 16V | Capacitor_SMD:CP_Elec_4x5.3 | C5 |
| 1 | 100nF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C4 |
| 1 | 2.2uF 16V | Capacitor_SMD:CP_Elec_4x5.3 | C1 |
| 1 | 200K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | 390K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 3K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 4K7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | Alimentação Geral | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Alimentação Motores | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | BC548 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | D | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | L7812 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | Liga | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | Motor 1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | Motor 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | SI4459ADY | SI4459ady:SO_ADY-T1-GE3_VIS | U10 |
| 1 | Saída Alimentação | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |

Miguel-Barcelos/Electronics-Projects
Este repositório contém projetos de eletrônica, incluindo circuitos eletrônicos, simulações e design de PCBs.


xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.

ciiiutnfrc/eduromaa
Versión educativa del robot móvil RoMAA (EduRoMAA)

Mario-dango/robot_SDLT
Proyecto de robot Seguidor De Líneas Transistorizado (SDLT) para realizar paso a paso en el Club de Robótica e Iot (CRI) del colegio técnico de la universidad de mendoza (ETec - UM)



loowiz/EDA_LabPS
This is a power supply project based on the chinese DIY kit "0-30V 2mA-3A Adjustable DC Regulated Power Supply".

It measures 82.9 × 99.7 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the DHT11, LM324, TCRT5000 and L7812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Miguel-Barcelos/Electronics-Projects repository on GitHub, at the commit this page was made from: the board is MB_PCB_SHIELD/Projeto PCB Miguel Barcelos/MB_PCB_SHIELD.kicad_pcb and its schematic MB_PCB_ControladorESP32/Duas_entradas_analogicas_isoladas.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Miguel-Barcelos before reusing the design.