2 layers21.6 × 66 mm
2 layers21.6 × 66 mm
RedPill Rev1.2 USB C
miggyval/RedPill_PCBKiCAD Project for RedPill
- Size
- 21.6 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 48
- Pads
- 146
- Tracks, vias
- 435, 173
- Pours
- 37
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Sep 2024
- Updated
- 27 Sep 2024
Overview
RedPill Rev1.2 USB C is an open-source printed circuit board by miggyval, from the miggyval/RedPill_PCB repository on GitHub. It is a 2-layer board of 21.6 × 66 mm with 28 parts on 48 nets, routed with 435 tracks and 173 vias.
It is built around the STM32G0B1KET6, TLV1117-33DCY and PTS810. Its parts include 6 capacitors, 5 connectors, 3 resistors, 3 diodes and 2 ICs. It belongs with the STM32 boards of this library.
Main components
3README
README.mdThis is a repository for the RedPill KiCAD project by Miguel Valencia
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C6 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
| 2 | 56k | Resistor_SMD:R_1206_3216Metric | R1, R3 |
| 2 | Pin_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | Pin_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J5, J6 |
| 2 | Schottky | Diode_SMD:D_0603_1608Metric | D1, D4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | AMBER | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | GND Test | TestPoint:TestPoint_THTPad_D4.0mm_Drill2.0mm | TP5 |
| 1 | M2_2.2mm_BL | MountingHole:MountingHole_2.2mm_M2 | H3 |
| 1 | M2_2.2mm_BR | MountingHole:MountingHole_2.2mm_M2 | H4 |
| 1 | M2_2.2mm_TL | MountingHole:MountingHole_2.2mm_M2 | H1 |
| 1 | M2_2.2mm_TR | MountingHole:MountingHole_2.2mm_M2 | H2 |
| 1 | PTS810 | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | SG-5032CAN | Oscillator:Oscillator_SMD_SeikoEpson_SG8002LB-4Pin_5.0x3.2mm | X1 |
| 1 | STM32G0B1KET6 | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | TLV1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
More from miggyval/RedPill_PCB
1Similar boards
- 4 layers88.9 × 79.4 mm
Link
oats-center/avena-rs
Avena On The Road: Bringing pavement health data to your fingertips
170 parts3 - 2 layers66 × 65 mm
- 2 layers160 × 100 mm
Interface board
cepr/daly-to-lithium-balance-adapter
Replacement traction battery for a 2018 Energica Ego. The original Lithium Balance s-BMS master (BMCU) stays in the bike.
112 parts - 4 layers54 × 84 mm
StepperLockingSystem
netz39/Stepper-Locking-System
Contains encoder & processor boards for closed-loop stepper motor angle control. Steering the key/door knob with the might of stepper motors.
107 partsMIT - 4 layers76.7 × 44.5 mm
- 2 layers77.5 × 118.1 mm
Tenkey plusplus
jonbobcar/tenkey_plusplus
Tenkey++ is a QMK powered, OSHW, USB-C connected, hotswapable numpad.
79 parts4 - 4 layers45 × 63.5 mm
- 2 layers99.1 × 84.8 mm
Frdm05-devboard
M-Skut/kl05z-devboard-demo
Firmware + hardware for KL05Z Development Board Add-on
71 parts1
Questions
How big is the RedPill Rev1.2 USB C PCB?
It measures 21.6 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RedPill Rev1.2 USB C use?
28 parts, built around the STM32G0B1KET6, TLV1117-33DCY and PTS810. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RedPill Rev1.2 USB C KiCad files?
From the miggyval/RedPill_PCB repository on GitHub, at the commit this page was made from: the board is RedPill_Rev1.2/RedPill_Rev1.2_USB-C.kicad_pcb and its schematic RedPill_Rev1.2/RedPill_Rev1.2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RedPill Rev1.2 USB C design in my own project?
Its repository states no licence, so its author keeps all rights: ask miggyval before reusing the design.