
Motherboard
MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

Hardware repository for the microlind project
ExpansionCardTemplate is an open-source printed circuit board by MicroLind-Developers, from the MicroLind-Developers/microlind-hw repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 170.2 × 70.1 mm with 20 parts on 51 nets, routed with 84 tracks and 8 vias.
It is built around the 74LS30PC and 74LS32SC. Its parts include 5 connectors, 4 capacitors and 3 ICs.
Hardware repository for the microlind project
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 3 | 100n | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C4 |
| 1 | 10µ | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | 74LS30 | Package_DIP:DIP-12_W7.62mm | U2 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | 74LS541 | Package_DIP:DIP-20_W7.62mm | U1 |
| 1 | Address | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Horizontal | J1 |
| 1 | Control | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | Data | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J6 |

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project



barberd/coco9511pak
This board is a cartridge for the Tandy Radio Shack TRS-80 Color Computer (CoCo), an 8 bit computer produced between 1980 and 1991. It provides an Arithmetic Processor Unit (APU), the AMD 9511, to the CoCo.





yanataka60/X1_SD
X1、X1turboでSD-CARDからのアプリケーション起動、BASICなどのアプリケーションからSD-CARDへのロード、セーブを実現するものです
It measures 170.2 × 70.1 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the 74LS30PC and 74LS32SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MicroLind-Developers/microlind-hw repository on GitHub, at the commit this page was made from: the board is peripherals/WIP/ExpansionCardTemplate/ExpansionCardTemplate.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).