4 layers50 × 50 mm
MagneticSensors
Michalek007/MastersThesis
Investigation of magnetic field sensors for applications in low-frequency magnetic field measurements
56 parts
2 layers60 × 40 mm
CurrentSource
Michalek007/MastersThesisInvestigation of magnetic field sensors for applications in low-frequency magnetic field measurements
- Size
- 60 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 22
- Pads
- 77
- Tracks, vias
- 41, 280
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jun 2026
- Updated
- 28 Sep 2026
Overview
CurrentSource is an open-source printed circuit board by Michalek007, from the Michalek007/MastersThesis repository on GitHub. It is a 2-layer board of 60 × 40 mm with 34 parts on 22 nets, routed with 41 tracks and 280 vias.
It is built around the OP27GPZ and IRLZ44N. Its parts include 10 resistors, 9 capacitors, 7 connectors, 1 IC and 1 diode. It belongs with the sensors and measurement boards of this library.
Main components
2Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J7 |
| 4 | R | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R8, R9 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 22n | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 3.3n | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 7.5 | Package_TO_SOT_THT:TO-220-2_Vertical | R1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | OP27GPZ | SamacSys_Parts:DIP794W56P254L959H533Q8N | IC1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
Questions
How big is the CurrentSource PCB?
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CurrentSource use?
34 parts, built around the OP27GPZ and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CurrentSource KiCad files?
From the Michalek007/MastersThesis repository on GitHub, at the commit this page was made from: the board is hardware/CurrentSource/CurrentSource.kicad_pcb and its schematic hardware/AD8429/AD8429.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CurrentSource design in my own project?
Its repository states no licence, so its author keeps all rights: ask Michalek007 before reusing the design.
More from Michalek007/MastersThesis
2- 4 layers35 × 35 mm
AD8429
Michalek007/MastersThesis
Investigation of magnetic field sensors for applications in low-frequency magnetic field measurements
38 parts
Similar boards
- 2 layers304.8 × 170.8 mm
- 2 layers94 × 79 mm
- 2 layers
Morpheus kicad
pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
66 parts80GPL-3.0 - 2 layers100 × 100 mm
- 2 layers157.5 × 97.8 mm
Esp32PrinterController
MitchBradley/Esp32PrinterController
PCB design for 3D printer controller using ESP32 processor
101 parts16MIT - 2 layers99.1 × 99.1 mm
- 2 layers64.8 × 109.2 mm
Dmx ledstrip dimmer-32ch
robinolejnik/dmx-ledstrip-dimmer-32ch
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.
105 parts14MIT - 2 layers101.6 × 53.3 mm
BatteryAnalyzer MkII
Moragor/BatteryAnalyzer_MkII
Updated Version of the battery analyzer, now with constant current
25 parts12MIT