Skip to the content
2 layers37.6 × 102.9 mmPDIST, the printed circuit board in 3D

Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

Size
37.6 × 102.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
22
Pads
124
Tracks, vias
92, 10
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Aug 2019
Updated
2 Apr 2026

Overview

PDIST is an open-source printed circuit board by michaelruppe, from the michaelruppe/FSAE repository on GitHub, published under the MIT licence. It is a 2-layer board of 37.6 × 102.9 mm with 48 parts on 22 nets, routed with 92 tracks and 10 vias.

Its parts include 10 resistors, 10 diodes, 10 connectors and 10 fuses.

README

README.md

FSAE

Hardware projects for the FSAE Electric 2019/2020 competition (Australia). 💻Github https://github.com/michaelruppe/FSAE

Resources

Team mentoring and design reviews available - contact through michaelruppe.com

ShutdownCircuit.com is a free resource to help new FSAE EV teams shortcut the growing pains of designing EV safety systems.

TSAL

A light that indicates presence of dangerous voltage within the Tractive System

The third iteration of the TSAL driver.

Watch a video walkthrough explaining the circuit operation and design decision.

Precharge

A device to precharge the Tractive System. This prototype features voltage feedback to protect AIRs. In open-loop systems, if a wiring fault develops - eg. precharge resistor is disconnected - then the precharge is ineffective and AIRs may become damaged.

The prototype Precharge module

HFL (Hard Fault Latch)

Latches momentary faults that are required to shutdown the EV.

Parts

48
QtyValueFootprintReferences
10Conn_01x02_MaleConnector_Molex:Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_VerticalJ1, J2, J3, J4, J5, J6, J7, J8, J9, J10
10FusePDIST:Fuse-Mini_Blade-3568F1, F2, F3, F4, F5, F6, F7, F8, F9, F10
10LEDLED_SMD:LED_0805_2012MetricD1, D2, D3, D4, D5, D6, D7, D8, D9, D10
10RResistor_SMD:R_1206_3216MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R10
2MountingHole_PadMountingHole:MountingHole_4.3mm_M4_Pad_ViaH1, H2

The 42 most common of 48 parts.

More from michaelruppe/FSAE

5
  • 2 layers133 × 98 mmPrecharge, the printed circuit board in 3D

    Precharge

    michaelruppe/FSAE

    Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

    121 parts59MIT
  • 2 layers80.9 × 57.8 mmTSAL HVM, the printed circuit board in 3D

    TSAL HVM

    michaelruppe/FSAE

    Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

    45 parts59MIT
  • 2 layers71.6 × 42.7 mmTSALv3, the printed circuit board in 3D

    TSALv3

    michaelruppe/FSAE

    Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

    44 parts59MIT
  • 2 layers42.5 × 42.5 mmTSAL DRV, the printed circuit board in 3D

    TSAL DRV

    michaelruppe/FSAE

    Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

    30 parts59MIT
  • 2 layersAIL, the printed circuit board in 3D

    AIL

    michaelruppe/FSAE

    Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

    16 parts59MIT

Similar boards

  • 2 layersDemo, the printed circuit board in 3D

    Demo

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    48 parts547GPL-3.0
  • 2 layers18.8 × 18.1 mmAmoeba royale, the printed circuit board in 3D

    Amoeba royale

    mtl/keyboard-pcbs

    Keyboard PCBs

    48 parts485
  • 2 layers48.1 × 115.6 mmAPU ENG CRANK PANEL, the printed circuit board in 3D

    APU ENG CRANK PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    48 parts431
  • 2 layers106 × 55 mmEndcap, the printed circuit board in 3D

    Endcap

    softerhardware/Hermes-Lite2

    A second generation low-cost amateur HF software defined radio transceiver.

    48 parts384
  • 2 layers42.8 × 88 mm18650 pcb, the printed circuit board in 3D

    18650 pcb

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    48 parts253GPL-3.0
  • 2 layers34 × 44 mmClk lo buffer, the printed circuit board in 3D

    Clk lo buffer

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    48 parts205
  • 2 layers70.6 × 189.2 mmNano, the printed circuit board in 3D

    Nano

    fellesverkstedet/fabricatable-machines

    Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki

    48 parts175

Questions

How big is the PDIST PCB?

It measures 37.6 × 102.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PDIST use?

48 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PDIST KiCad files?

From the michaelruppe/FSAE repository on GitHub, at the commit this page was made from: the board is PDIST/PDIST.kicad_pcb and its schematic TSALv3/TSALv3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PDIST design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).