
LED Bar - 16P
michaelkamprath/breadboard-led-bar-graph
PCB designs for LED bar graphs designed to minimize its footprint on a breadboard.

PCB designs for LED bar graphs designed to minimize its footprint on a breadboard.
LED Bar - 24P is an open-source printed circuit board by michaelkamprath, from the michaelkamprath/breadboard-led-bar-graph repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 12 × 67.5 mm with 27 parts on 49 nets, routed with 100 tracks and 0 vias.
Its parts include 24 diodes and 1 connector.
This repository contains some KiCad projects that implement LED bar graphs made out of discrete, rectangular LEDs and designed to minimize the footprint taken on a breadboard. This is done by making the connection to the breadboard being a single row of pin headers with one pin for each LED and one pin for ground, thus making these "common cathode" LEDs. However, nothing prevents the building from inserting the LEDs in reverse and thus making these bard graphs "common anode". Current limiting resistors are added by using resistor arrays.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | LED | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +8 |
| 2 | R_Network12_US | Resistor_THT:R_Array_SIP13 | RN1, RN2 |
| 1 | Conn_01x25_Male | Connector_PinHeader_2.54mm:PinHeader_1x25_P2.54mm_Vertical | J1 |

michaelkamprath/breadboard-led-bar-graph
PCB designs for LED bar graphs designed to minimize its footprint on a breadboard.

michaelkamprath/breadboard-led-bar-graph
PCB designs for LED bar graphs designed to minimize its footprint on a breadboard.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
It measures 12 × 67.5 mm and has 2 copper layers, 1.6 mm thick.
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the michaelkamprath/breadboard-led-bar-graph repository on GitHub, at the commit this page was made from: the board is LED Bar - 24P/LED Bar - 24P.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).