
CM4ClusterHat
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4

Rpi cm4-carrier is an open-source printed circuit board by michael-pisman, from the michael-pisman/first_cm4_board repository on GitHub. It is a 2-layer board of 40 × 55 mm with 24 parts on 172 nets, routed with 194 tracks and 4 vias.
It is built around the D3V3F4U10LP-7(ES), BD2233G-GTR and 0826-1X1T-M1-F, with the USB4105-GF-A among its other parts. Its parts include 11 resistors, 5 ICs, 3 connectors, 2 diodes and 1 capacitor. It belongs with the computers and single-board computers boards and the Raspberry Pi (Linux) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | D3V3F4U10LP-7 | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U2, U3, U6 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 2.2K 1% | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 470R | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2 |
| 2 | nf | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 1 | 0826-1X1T-M1-F | 0826-1X1T-M1-F:0826-1X1T-M1-F | J3 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 12K 1% | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 74LVC1G07QW5-7 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1 |
| 1 | BD2233G-GTR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | ComputeModule4 | CM4IO:Raspberry-Pi-4-Compute-Module | Module1 |
| 1 | LED Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LED Red | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Micro_SD_Card_Det | CM4IO:SDCARD_MOLEX_503398-1892 | J2 |
| 1 | SMBJ5.0A-13-F | Diode_SMD:D_SMB | CR1 |
| 1 | USB4105-GF-A | USB4105-GF-A:USB4105-GF-A | J1 |

will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4






iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

It measures 40 × 55 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the D3V3F4U10LP-7(ES), BD2233G-GTR, 0826-1X1T-M1-F and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the michael-pisman/first_cm4_board repository on GitHub, at the commit this page was made from: the board is rpi-cm4-carrier/rpi-cm4-carrier.kicad_pcb and its schematic rpi-cm4-carrier/cm4-gpio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask michael-pisman before reusing the design.