
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

TV be gone implementation on attiny44
Tvbgone workshop is an open-source printed circuit board by Miceuz, from the Miceuz/TV-B-Gone repository on GitHub. It is a 2-layer board of 56.1 × 66 mm with 30 parts on 16 nets, routed with 127 tracks and 25 vias.
Its parts include 8 resistors, 5 diodes, 4 capacitors, 2 transistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This is my custom TV-be-gone implementation. The board was ment to fit on a standard double AA battery compartment. In general, this design was driven by what parts do I have available in my junk box, thus I've chosen Attiny44 as main microcontroller as I have plenty of them. Leds are driven by mosfets because I had some scavenged from some motherboard.
The code is from Adafruit - https://github.com/adafruit/TV-B-Gone-kit. I've removed all the codes for North American TVs and commented out the biggest codes for European TVs as Attiny44 does not have enough flash to fit them all. I've inverted PWM because I'm driving LEDs via N-channel mosfets, unlike BJTs in Adafruit version.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistors_SMD:Resistor_SMD0805_HandSoldering | R1, R2, R3, R4, R5, R6, R8 |
| 5 | LED | LED-5MM | D1, D2, D3, D4, D5 |
| 4 | VAL** | MECH-HOLE220 | , , , |
| 2 | 22p | Resistors_SMD:Resistor_SMD0805_HandSoldering | C2, C3 |
| 2 | MOSFET_N | SOT23GDS | Q1, Q2 |
| 1 | 100n | Resistors_SMD:Resistor_SMD0805_HandSoldering | C4 |
| 1 | 330 | Resistors_SMD:Resistor_SMD0805_HandSoldering | R7 |
| 1 | 8MHz | HC-49V | X1 |
| 1 | ATTINY85-S | SO8_200mil_wide | IC1 |
| 1 | AVR-ISP-6 | pin_array_3x2 | ISP |
| 1 | BATTERY | BATT-AA-BK92 | BT1 |
| 1 | BATTERY | BATT-AA-BK92-bold | BT2 |
| 1 | CAPAPOL | Capacitors_Tantalum_SMD:TantalC_SizeE_EIA-7360_HandSoldering | C1 |
| 1 | SW_PUSH_SMALL | SW_PUSH_SMALL | SW1 |
| 1 | Symbol_OSHW-Logo_SilkScreen_07Jul2012 | Symbols:Symbol_OSHW-Logo_SilkScreen | SYM |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 56.1 × 66 mm and has 2 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Miceuz/TV-B-Gone repository on GitHub, at the commit this page was made from: the board is tvbgone-workshop/tvbgone-workshop.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Miceuz before reusing the design.