

Linear dimmer
A linear dimmer for 6W - 12W LED pannels.
- Size
- 49.3 × 30.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 19
- Pads
- 89
- Tracks, vias
- 403, 180
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Jul 2015
- Updated
- 19 Jul 2017
Overview
Linear dimmer is an open-source printed circuit board by Miceuz, from the Miceuz/linear-led-dimmer repository on GitHub. It is a 2-layer board of 49.3 × 30.4 mm with 31 parts on 19 nets, routed with 403 tracks and 180 vias.
It is built around the MCP6072-E/SN, LM78L05ACZ and BUK6207-55C-VB. Its parts include 13 resistors, 7 capacitors, 4 ICs, 2 diodes and 2 connectors.
Main components
3MCP6072-E/SN
SOIC-8-40℃~+125℃ 0.5V/us 1.2MHz 1.5uV/℃ 1.8V~6V 110uA 150uV 19nV/√Hz@10kHz 1pA 1pA 2 28mA 91dB Built-in compensation、Reverse-phase input protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Precision Op Amps ROHSMicrochip TechnologyOperational AmplifierLM78L05ACZ
TO-920℃~+125℃@(Tj) 1 100mA 20V 3mA 40uVrms 5V 62dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-92 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBUK6207-55C-VB
TO-252-55℃~+175℃ 1 N-channel 136W 200pF 4.844nF 441pF 4V 5mΩ@10V 60V 82nC@10V 97A N-Channel TO-252 MOSFETs ROHSVBsemi ElecMOSFETs
README
README.mdlinear-led-dimmer
A linear dimmer for 6W - 12W LED pannels.

This dimmer has to burn some power in order to dimm leds for custom made LED pannel used in cinema settings. We need to resort to crude linear dimming in order to avoid any kind of flicker on camera.
More info and eye candy here:
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1u | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4, C5, C6, C9 |
| 3 | 10k | Resistors_SMD:R_0603_HandSoldering | R3, R9, R10 |
| 2 | 0R5 | w_smd_resistors:r_2512 | R6, R7 |
| 2 | 220 | Resistors_SMD:R_0603_HandSoldering | R5, R12 |
| 2 | 2k | Resistors_SMD:R_0603_HandSoldering | R1, R13 |
| 1 | 10k | w_pth_resistors:trimmer_alps-rk09k1130ah1 | RV1 |
| 1 | 17.4k | Resistors_SMD:R_0603_HandSoldering | R2 |
| 1 | 1M | Resistors_SMD:R_0603_HandSoldering | R11 |
| 1 | 45.3k | Resistors_SMD:R_0603_HandSoldering | R4 |
| 1 | 78.7k | Resistors_SMD:R_0603_HandSoldering | R8 |
| 1 | BARREL_JACK | WURTH694102107102 | CON1 |
| 1 | BLUE | w_smd_leds:Led_0603 | D1 |
| 1 | BUK6207-55C | w_smd_trans:d-pak | Q1 |
| 1 | LM78L05ACZ | Housings_SOT-23_SOT-143_TSOT-6:SOT-23_Handsoldering | U1 |
| 1 | MCP6072 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | MCP65R41T | w_smd_trans:sot23-6 | U4 |
| 1 | POWER | w_pin_strip:pin_socket_2 | P1 |
| 1 | RED | w_smd_leds:Led_0603 | D2 |
| 1 | REF3012 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23_Handsoldering | U3 |
| 1 | Switch_SPDT_x2 | Buttons_Switches_SMD:SW_SPDT_PCM12 | SW1 |
More from Miceuz/linear-led-dimmer
1- 2 layers149.5 × 43.5 mm

Similar boards
- 2 layers

- 2 layers99.1 × 60.3 mm

FTController
jbtronics/FTController
A Motor controller for Fischertechnik with many cool features.
94 parts5 - 2 layers44.5 × 23.4 mm

ProbUSBis a1
emdarcher/probUSBis_hardware
hardware files for probUSBis board, a custimized USB ATtiny85 board based on LittleWire and DigiSpark.
26 parts1 - 2 layers45.1 × 26 mm

- 2 layers100 × 50 mm

Ebus adapter
sarfata/ebus-adapter
This is a read/write adapter for eBus heating bus. It can be connected to a USB-serial adapter (3.3V or 5V) - or to a Particle Photon.
32 parts - 2 layers14.6 × 13.1 mm

- 2 layers65 × 56 mm

CANHat
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
29 parts24 - 2 layers80 × 66 mm

Questions
How big is the Linear dimmer PCB?
It measures 49.3 × 30.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Linear dimmer use?
31 parts, built around the MCP6072-E/SN, LM78L05ACZ and BUK6207-55C-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Linear dimmer KiCad files?
From the Miceuz/linear-led-dimmer repository on GitHub, at the commit this page was made from: the board is linear-dimmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Linear dimmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask Miceuz before reusing the design.