Skip to the content
2 layers21 × 73 mmEsp32-breadboard board, the printed circuit board in 3D

This project is an ESP32-S3-WROOM-1 devboard that can fit on a breadboard, unlike standard ESP32 DevKit V1s. I made it because my current ESP32s don't fit on a breadboard and it makes it really difficult to prototype…

Size
21 × 73 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
49
Pads
167
Tracks, vias
690, 51
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
28 Jun 2026
Updated
1 Jul 2026

Overview

Esp32-breadboard board is an open-source printed circuit board by mgollapudi104, from the mgollapudi104/ESP32-Breadboard-Devboard repository on GitHub. It is a 2-layer board of 21 × 73 mm with 25 parts on 49 nets, routed with 690 tracks and 51 vias.

It is built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3 and USBLC6-2SC6, with the TYPE-C-31-M-12 among its other parts. Its parts include 9 capacitors, 5 resistors, 3 ICs, 2 diodes and 2 connectors. It belongs with the ESP32 boards of this library.

Main components

4

README

README.md

ESP32 Breadboard Devboard

This project is an ESP32-S3-WROOM-1 devboard that can fit on a breadboard, unlike standard ESP32 DevKit V1s. I made it because my current ESP32s don't fit on a breadboard and it makes it really difficult to prototype easily, so this fixes that problem.

devboard

Journal

Features

  • ESP32-S3-WROOM-1 Microcontroller
  • 33 GPIO Pins
  • 2 3.3V Pins
  • 1 VCC Pin (5-12V)
  • Reset + Boot Buttons
  • USB-C Receptacle
  • Cool Art!

Tech Stack:

  • KiCad (PCB Design)
  • Onshape (CAD Renders)
  • Inkscape (SVG Art Drawing)
  • VS Code (Documentation)

Images

Schematic:
schematic

PCB:
pcb

CAD (Back):
cad

Bill of Materials

ManufacturerDescriptionQtyTotal PriceLink
Samsung10uF 10V X5R 0603 Ceramic Capacitor6$0.26C19702
Samsung1uF 25V X5R 0402 Ceramic Capacitor2$0.04C52923
Samsung100nF 16V X7R 0402 Ceramic Capacitor6$0.01C1525
Jiangsu ChangjingB5819WSL 1A 40V SOD-123 Schottky Diode2$0.06C8598
Hubei KENTORed LED Water Clear 06032$0.01C2286
UNI-ROYAL0Ω 0402 Thick Film Resistor2$0.01C17168
UNI-ROYAL5.1kΩ 0402 1% Resistor4$0.01C25905
UNI-ROYAL2.2kΩ 0402 1% Resistor2$0.01C25879
UNI-ROYAL10kΩ 0402 1% Resistor4$0.01C25744
XUNPU4x3mm SMD Tactile Switch (Button)4$0.22C720477
STMicroelectronicsUSBLC6-2SC6 SOT-23-6 ESD Protection5$0.83C7519
Advanced MonolithicAMS1117-3.3V 1A LDO SOT-2232$0.40C6186
Korean HropartsType-C 16-Pin Female SMD USB Connector2$0.37C165948
Espressif SystemsESP32 Wi-Fi & Bluetooth Module1$4.77C2913198
BOOMELE1x20P 2.54mm Pin Header5$0.78C50981

Manufacturing & Cost Summary

Item / ServiceQtyPrice
PCB Manufacturing (JLCPCB)5$2.00
PCB Assembly / PCBA (JLCPCBA)2$19.15
Components Subtotal-$7.79
JLCPCB Shipping (GSDL)-$3.12
LCSC Shipping (GSDL)-$8.00
LCSC Handling Fee-$5.00
Total Project Cost$42.82

Motivation

I made this project to make ESP32 modules usable on a devboard. It also helped me develop my PCB skills. I also want to present my design at Open Sauce 2026.

Parts

25
QtyValueFootprintReferences
40.1uFCapacitor_SMD:C_0402_1005MetricC8, C9, C12, C15
410uFCapacitor_SMD:C_0603_1608MetricC7, C10, C11, C13
210kResistor_SMD:R_0402_1005MetricR5, R6
25.1kResistor_SMD:R_0402_1005MetricR1, R2
2Conn_01x22_PinConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ2, J3
11uFCapacitor_SMD:C_0402_1005MetricC14
12.2kResistor_SMD:R_0402_1005MetricR3
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1BOOTeasyeda2kicad:SW-SMD_L3.9-W3.0-P4.45SW1
1D_Schottky_Smalleasyeda2kicad:SOD-123_L2.7-W1.6-LS3.7-RDD1
1ENeasyeda2kicad:SW-SMD_L3.9-W3.0-P4.45SW2
1ESP32-S3-WROOM-1easyeda2kicad:WIFIM-SMD_ESP32-S3-WROOM-1-N8U1
1Polyfuse_SmallFuse:Fuse_0402_1005MetricF1
1RED LEDLED_SMD:LED_0603_1608MetricD5
1TYPE-C-31-M-12easyeda2kicad:USB-C_SMD-TYPE-C-31-M-12_1USBC1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2

Similar boards

  • 2 layers61 × 35 mmEsp32-1pcb, the printed circuit board in 3D

    Esp32-1pcb

    shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board-

    Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED

    44 parts1
  • 2 layers78 × 58 mmDick mouse, the printed circuit board in 3D

    Dick mouse

    segfau-yama/dxxk_mouse

    ESP32-S3 上で動作する Rust 製 USB 入力デバイスの実験用リポジトリです。

    51 partsMIT
  • 2 layers80 × 54 mmBis zone, the printed circuit board in 3D

    Bis zone

    tsmiltonAgents/pl60c-dmx-wakeup

    A small ESP32-S3 board that drives the wired DMX512 input of a Neewer PL60C panel light so the light can be ramped up slowly in the morning (sunrise alarm). Rev A, 2026-09-02.

    39 parts
  • 4 layers100 × 50 mmPsu ext, the printed circuit board in 3D

    Psu ext

    PSU-Ext-Org/psu-ext-hardware

    A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.

    137 parts9CERN-OHL-S-2.0
  • 2 layers95 × 55 mmSumec, the printed circuit board in 3D

    Sumec

    bismarx-v1/Sumec-MiniSumo

    OLD REPO, FOR NEW UPDATES VISIT: https://github.com/bismarx-v1/Sumec-MiniSumo-master

    61 parts5
  • 4 layers60 × 80 mmWisp, the printed circuit board in 3D

    Wisp

    huulanka/wisp

    Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.

    91 partsMIT
  • 4 layers60 × 120 mmTheoros, the printed circuit board in 3D

    Theoros

    Majorwhiskey/gps-lora

    Theoros is a USB-C GPS logger and LoRa tracker built on the ESP32-S3. It logs 1 Hz u-blox M10 fixes to microSD, shows status on an OLED and sends AES-128-CCM encrypted position over 868 MHz LoRa.

    88 partsCERN-OHL-P-2.0

Questions

How big is the Esp32-breadboard board PCB?

It measures 21 × 73 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32-breadboard board use?

25 parts, built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3, USBLC6-2SC6 and TYPE-C-31-M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32-breadboard board KiCad files?

From the mgollapudi104/ESP32-Breadboard-Devboard repository on GitHub, at the commit this page was made from: the board is KiCad/esp32-breadboard-board/esp32-breadboard-board.kicad_pcb and its schematic KiCad/esp32-breadboard-board/esp32-breadboard-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32-breadboard board design in my own project?

Its repository states no licence, so its author keeps all rights: ask mgollapudi104 before reusing the design.