4 layers58 × 31 mm
4 layers
STM32 Bluetooth Hardware Design
mfrisch3/BluetoothMicroPCB- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 42
- Nets
- 56
- Pads
- 196
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 May 2025
- Updated
- 8 Aug 2025
Overview
STM32 Bluetooth Hardware Design is an open-source printed circuit board by mfrisch3, from the mfrisch3/BluetoothMicroPCB repository on GitHub. It is a 4-layer board with 42 parts on 56 nets.
It is built around the DLF162500LT-5028A1, USBLC6-2SC6 and MIC5365-3.3YD5-TR. Its parts include 19 capacitors, 6 resistors, 4 ICs, 4 connectors and 3 inductors. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
3
DLF162500LT-5028A1
SMD-4P,1.6x0.8mm-40℃~+85℃ 0.33dB 2.4GHz~2.5GHz 49.2dB 50Ω Low Pass SMD-4P,1.6x0.8mm RF Filters ROHSTDKRF Filters
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
MIC5365-3.3YD5-TR
TSOT-23-5-40℃~+125℃@(Tj) 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C9, C10, C16, C17 |
| 5 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C7, C8, C11, C18, C19 |
| 3 | 5k1 | Resistor_SMD:R_0402_1005Metric | R1, R3, R4 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 220R | Resistor_SMD:R_0402_1005Metric | R2, R5 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2, U4 |
| 1 | 0p3 | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 0p8 | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 10n | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 2n7 | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X2 |
| 1 | 32kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | X1 |
| 1 | Conn_01x04_Pin | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J4 |
| 1 | Conn_Coaxial | Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J2 |
| 1 | DLF162500LT-5028A1 | STM32BluetoothLibrary:DLF162500LT-5028A1 | FLT1 |
| 1 | MIC5365-3.3YD5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | STM32WB55CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
Questions
What parts does the STM32 Bluetooth Hardware Design use?
42 parts, built around the DLF162500LT-5028A1, USBLC6-2SC6 and MIC5365-3.3YD5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32 Bluetooth Hardware Design KiCad files?
From the mfrisch3/BluetoothMicroPCB repository on GitHub, at the commit this page was made from: the board is STM32 Bluetooth Hardware Design.kicad_pcb and its schematic MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32 Bluetooth Hardware Design design in my own project?
Its repository states no licence, so its author keeps all rights: ask mfrisch3 before reusing the design.
Similar boards
- 4 layers67.4 × 35.4 mm
- 4 layers48 × 33 mm
Stm32-bt board
OdaiJ/stm32-bt-board
My attempt at following the Phil's Lab KiCad V7 tutorial on YouTube
60 parts1 - 4 layers80.5 × 32.5 mm
Stm32wb55-ble dev board
shivamtiwari020505/stm32wb55-ble-dev-board
Custom STM32WB55 development board integrating 2.4GHz BLE 5.x, LPUART, I2C, and UART via RS232/DB9 for PC and industrial machine interfacing. Designed to bridge modern wireless IoT with legacy wired systems.
63 parts1MIT - 4 layers
- 4 layers117 × 77 mm
ProdDeck
arsovskiteodor/A.ProdDeck
Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator
69 parts - 4 layers48.5 × 24.3 mm
STM32 2nd Project
ashfaque-ur-rahman/STM32WB-RF-PCB-Design
STM32 microcontroller PCB design with RF capability —4 layer Board —KiCad project based on Phil's Lab tutorial series
48 parts - 4 layers29 × 43 mm
Flight controller
Bobev64/sensor-board
KiCAD design attempt at a flight controller for an RC airplane.
52 parts