

Stonkstarbie
Starbie desk pet with a live stock ticker screen. XIAO ESP32-C3 + OLED + MPU6050. Hack Club Half-Life.
- Size
- 100 × 65.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 27
- Pads
- 50
- Tracks, vias
- 53, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Oct 2026
- Updated
- 21 Oct 2026
Overview
Stonkstarbie is an open-source printed circuit board by Mflash777, from the Mflash777/starbiestonks repository on GitHub. It is a 2-layer board of 100 × 65.5 mm with 7 parts on 27 nets, routed with 53 tracks and 25 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
PCB/README.mdPCB
KiCad 10 project for the Starbie Stocks board (a car-shaped 2-layer PCB, about 100 x 65.5 mm).
stonkstarbie.kicad_pro,.kicad_sch,.kicad_pcb: the project, schematic and board.gerbers/: Gerber and drill files exported from KiCad, ready to send to a PCB fab. Suggested options: 2 layers, 1.6 mm, blue solder mask, white silkscreen.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | XIAO-ESP32-C3-SMD | Seeed_Studio_XIAO_Series:XIAO-ESP32-C3-SMD | U1 |
Similar boards
- 2 layers96.6 × 82.8 mm

- 2 layers100 × 50 mm

Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm

- 2 layers

OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm

SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers

Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm

Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm

Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
How big is the Stonkstarbie PCB?
It measures 100 × 65.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stonkstarbie use?
7 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stonkstarbie KiCad files?
From the Mflash777/starbiestonks repository on GitHub, at the commit this page was made from: the board is PCB/stonkstarbie.kicad_pcb and its schematic PCB/stonkstarbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stonkstarbie design in my own project?
Its repository states no licence, so its author keeps all rights: ask Mflash777 before reusing the design.