Skip to the content
2 layers55 × 14.7 mmMinCab, the printed circuit board in 3D

small carrier board for Raspberry Pi CM4

Size
55 × 14.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
82
Pads
159
Tracks, vias
189, 22
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20210824)
Created
6 Nov 2021
Updated
25 Dec 2022

Overview

MinCab is an open-source printed circuit board by merocle, from the merocle/mincab repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 55 × 14.7 mm with 29 parts on 82 nets, routed with 189 tracks and 22 vias.

It is built around the 74LVC1G07SE-7-MS and USB4105-GF-A. Its parts include 5 capacitors, 4 resistors, 2 diodes, 1 IC and 1 connector. It belongs with the computers and single-board computers boards and the Raspberry Pi (Linux) boards of this library.

Main components

2

README

README.md

Parts

29
QtyValueFootprintReferences
8TestPointTestPoint:TestPoint_Pad_D2.0mmIO2, IO3, IO4, IO12, IO13, IO14, IO15, IO18
410uCapacitor_SMD:C_0805_2012MetricC2, C3, C4, C5
3LOGOLOGOG***, G***, G***
21kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R4
25.1kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
2TestPointTestPoint:TestPoint_Pad_D2.5mm+3.3V, +5V
2TestPointTestPoint:TestPoint_Pad_2.0x2.0mmGND, GND
1100uFCapacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-DC1
174LVC1G07SE-7Package_TO_SOT_SMD:SOT-353_SC-70-5U1
1ComputeModule4CM4IO:Raspberry-Pi-4-Compute-Module-big-holesModule1
1LED BlueLED_SMD:LED_0603_1608MetricD1
1LED WhiteLED_SMD:LED_0603_1608MetricD2
1USB4105-GF-AUSB4105-GF-A:GCT_USB4105-GF-AJ1

More from merocle/mincab

2
  • 4 layers55 × 14.7 mmMinCab, the printed circuit board in 3D

    MinCab

    merocle/mincab

    small carrier board for Raspberry Pi CM4

    41 parts180CC-BY-SA-4.0
  • 2 layers55 × 14.7 mmMinCab, the printed circuit board in 3D

    MinCab

    merocle/mincab

    small carrier board for Raspberry Pi CM4

    34 parts180CC-BY-SA-4.0

Similar boards

  • 2 layers81.8 × 55.4 mmCm4-digipi carrier, the printed circuit board in 3D

    Cm4-digipi carrier

    hemna/cm4-digipi-carrier

    Raspberry Pi CM4 Carrier board for Ham radio PTT Control

    52 parts3
  • 8 layers55 × 40 mmCm5-nano compatible, the printed circuit board in 3D

    Cm5-nano compatible

    david0ha/astra-cm5-nano

    KiCad files and specifications for a 55 × 40 mm CM5 carrier board.

    74 parts
  • 4 layers54.6 × 57.1 mmCM5 MINIMA, the printed circuit board in 3D

    CM5 MINIMA

    piecol/CM5_MINIMA_REV1

    CM5 LoRaWAN carrier board in a compact, feature-filled footprint

    98 parts63CERN-OHL-S-2.0
  • 2 layers114 × 102 mmRpi cm4-switch board, the printed circuit board in 3D

    Rpi cm4-switch board

    sequoia-hope/rpi-cm4-switch-board

    A Raspberry Pi (RPi) Compute Module 4 (CM4) Carrier Board with integrated gigabit switch

    94 parts45
  • 6 layers76 × 56 mmCM4 MANET, the printed circuit board in 3D

    CM4 MANET

    ties1887/Mesh-radio-Halow-LoRa

    Modular mesh radio system using Raspberry Pi + HaLow (802.11ah) + LoRa.

    122 parts40
  • 4 layers170 × 170 mmCM5IO, the printed circuit board in 3D

    CM5IO

    sanctuary-systems-com/rpi-cm5io-mini-itx

    A mini ITX board with PCIe x16 based on the Raspberry Pi Comput Module 5 IO board

    75 parts29CERN-OHL-P-2.0
  • 6 layers80.9 × 63 mmCM4IOv5, the printed circuit board in 3D

    CM4IOv5

    neatstranger/Pi-In-The-Skyy

    PoE Camera, Based on Raspberry Pi CM4

    69 parts24

Questions

How big is the MinCab PCB?

It measures 55 × 14.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MinCab use?

29 parts, built around the 74LVC1G07SE-7-MS and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MinCab KiCad files?

From the merocle/mincab repository on GitHub, at the commit this page was made from: the board is MinCab_v1.0/Kicad project/MinCab.kicad_pcb and its schematic MinCab_v1.0/Kicad project/MinCab.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MinCab design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).