Skip to the content
2 layers73.5 × 87 mmMacroPad, the printed circuit board in 3D

Custom Macropad

Size
73.5 × 87 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
23
Pads
102
Tracks, vias
146, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Feb 2025
Updated
16 Feb 2025

Overview

MacroPad is an open-source printed circuit board by Meowkewok, from the Meowkewok/Hephaestus repository on GitHub, published under the MIT licence. It is a 2-layer board of 73.5 × 87 mm with 21 parts on 23 nets, routed with 146 tracks and 0 vias.

Its parts include 10 switches, 9 diodes and 1 IC. It belongs with the keyboards and input boards and the SAM D and SAM boards of this library.

README

README.md

MacroPad Project [Hephaestus]

Overview

This project is a custom MacroPad powered by a Seeeduino XIAO RP2040. It includes an OLED display, a rotary encoder, and a 3x3 key matrix.

Features

  • Seeeduino XIAO as the main microcontroller
  • Rotary Encoder with push-button functionality
  • 3x3 Key Matrix
  • OLED Display
  • 3D Printed Case for enclosure

Screenshots

Overall Hackpad

Overall Hackpad

Schematic

Schematic

PCB Layout

PCB Layout

Case Design

Case

Bill of Materials (BOM)

The following table contains all the components needed for this macropad:

Part NameQuantity
XIAO RP20401x
Cherry MX keyswitches9x
Diodes 1N4148 D-359x
SSD1306 OLED .961x
EC-11 Rotary Encoder1x
Printed Case1x

Firmware

The MacroPad firmware is implemented using KMK.

Usage

  • Rotary Encoder for volume control and mute.
  • Press keys for WASD. (also Q/E)

Future:

  • Implement proper OLED functionality

License

This project is open-source under the MIT License.

Parts

21
QtyValueFootprintReferences
9DDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8, D9
9SW_Push_45degXIAORP2040:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9
1RotaryEncoder_SwitchXIAORP2040:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW10
1SSD1306XIAORP2040:128x64OLEDBrd1
1SeeeduinoXIAOXIAORP2040:XIAO-SAMD21-DIPU1

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the MacroPad PCB?

It measures 73.5 × 87 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MacroPad use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MacroPad KiCad files?

From the Meowkewok/Hephaestus repository on GitHub, at the commit this page was made from: the board is Hackpad submit/PCB/MacroPad.kicad_pcb and its schematic Hackpad submit/PCB/MacroPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MacroPad design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).