

EE250 Lab7 PCB
- Size
- 63.5 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 45
- Pads
- 68
- Tracks, vias
- 27, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 21 Oct 2026
- Updated
- 21 Oct 2026
Overview
Lab7 is an open-source printed circuit board by meldddiiiii, from the meldddiiiii/EE250_Lab7 repository on GitHub. It is a 2-layer board of 63.5 × 63.5 mm with 13 parts on 45 nets, routed with 27 tracks and 0 vias.
Its parts include 6 resistors, 2 capacitors, 2 switches, 1 IC and 1 diode. It belongs with the ESP32 boards of this library.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R3, R4 |
| 2 | 100nF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R5 |
| 1 | LDR07 | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R6 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | Push Button | SW_PUSH_6mm_2pin:SW_PUSH_6mm_2pin | SW2 |
| 1 | Thermistor_NTC | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | TH1 |
| 1 | Vibration Switch | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | SW1 |
| 1 | YD-ESP32-S3 | YD-ESP32-S3:YD-ESP32-S3 | U1 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Lab7 PCB?
It measures 63.5 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lab7 use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lab7 KiCad files?
From the meldddiiiii/EE250_Lab7 repository on GitHub, at the commit this page was made from: the board is Lab7.kicad_pcb and its schematic Lab7.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lab7 design in my own project?
Its repository states no licence, so its author keeps all rights: ask meldddiiiii before reusing the design.