
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Collect fluid flow data and publish it to a server that can alert about annomalies
Smart fluid flow meter is an open-source printed circuit board by mekadomus, from the mekadomus/smart-fluid-flow-meter repository on GitHub. It is a 2-layer board of 64 × 54 mm with 14 parts on 33 nets, routed with 28 tracks and 0 vias.
Its parts include 4 resistors, 3 diodes, 2 connectors, 1 IC and 1 switch. It belongs with the ESP32 boards of this library.
Hardware and software for a system that monitors flow of fluids (most likely water) and reports it to a back-end that can emit alerts based on configured preferences.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | MH1, MH2, MH3 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 3.3M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J2 |
| 1 | ESP32-DevkitV1 | footprints:esp32_devkit_v1 | U2 |
| 1 | Factory reset button | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1 |
| 1 | Green LED | LED_THT:LED_D5.0mm | D1 |
| 1 | Red LED | LED_THT:LED_D5.0mm | D3 |
| 1 | YF-S201 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | Yellow LED | LED_THT:LED_D5.0mm | D2 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 64 × 54 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mekadomus/smart-fluid-flow-meter repository on GitHub, at the commit this page was made from: the board is electronics/smart-fluid-flow-meter.kicad_pcb and its schematic electronics/smart-fluid-flow-meter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mekadomus before reusing the design.