4 layers51.1 × 94 mm
Das4-controller
brandonrc/das4-controller
Open-source RP2350B replacement controller board for the Das Keyboard 4 Professional (KiCad 10)
83 parts1MIT
2 layers
SmartEggTimer
meierh/Embedded_System_Hands_On_IAll files related to the group project can be found in the Project folder. It contains the following parts of our project:
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 81
- Pads
- 237
- Tracks, vias
- 543, 50
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Sep 2024
- Updated
- 28 Sep 2024
Overview
SmartEggTimer is an open-source printed circuit board by meierh, from the meierh/Embedded_System_Hands_On_I repository on GitHub. It is a 2-layer board with 66 parts on 81 nets, routed with 543 tracks and 50 vias.
It is built around the STM32F103RET6, AP7361C-33E and EC12E24204A2, with the STP60NF06L among its other parts. Its parts include 22 resistors, 18 capacitors, 8 connectors, 7 switches and 2 ICs. It belongs with the STM32 boards of this library.
Main components
4
STM32F103RET6
LQFP-64(10x10)-40℃~+85℃ 12bit 12bit 2V~3.6V 32 Bit 51 512KB 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
AP7361C-33E
SOT-223-40℃~+85℃@(Ta) 1 1A 3.3V 340mV@(1A) 6V 75dB@(1kHz) 80uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
EC12E24204A2
插件插件 Rotary Encoders ROHSALPSALPINERotary Encoders
STP60NF06L
TO-220-65℃~+175℃ 1 N-channel 110W 14mΩ@10V 1V 2nF 60A 60V 66nC@4.5V TO-220 MOSFETs ROHSSTMicroelectronicsMOSFETs
README
readme.mdESHO1 Group 07
Group Project
All files related to the group project can be found in the Project folder. It contains the following parts of our project:
- PCB Design
- Case Design
- Software
- High-Level Software with emulated hardware (developed while the PCB was not finished yet)
- Full Software for our custom PCB (extension of the high-level software to work with the custom PCB)
- Audio Files :smile:
The project documentation can be found here.
Tasks 1 - 6
The full documentation of tasks 1 - 6 can be found here. Source code and additional files for each task can be found in the respective subfolders.
Usage
- Ensure to clone submodules too
git submodule update --init --recursiveNote
.gitignore contains an entry to ignore the folder "LOCAL" and all of its subfolders anywhere within this project.
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R8, R9, R10, R11, R14, R16, R18, R20 |
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6, C14 |
| 6 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C9, C15, C16, C17, C18 |
| 4 | 22k | Resistor_SMD:R_0402_1005Metric | R15, R17, R19, R21 |
| 4 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J3, J7, J8 |
| 4 | MountingHole | custom-parts:MountingHole_4.3mm_M4_Without-Screws | H1, H2, H3, H8 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R4, R22, R23 |
| 3 | 10n | Capacitor_SMD:C_0402_1005Metric | C7, C12, C13 |
| 3 | 4k7 | Resistor_SMD:R_0402_1005Metric | R1, R6, R7 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C10, C11 |
| 2 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW3, SW4 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 600R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | AP7361C-33E | custom-parts:SOT-223_L6.5-W3.5-P2.30-LS7.0-BR | U2 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | EC12E24204A2 | custom-parts:SW-TH_EC12E24204A2 | SW2 |
| 1 | LOGO | LOGO | G*** |
| 1 | STM32F103RET6 | custom-parts:LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL | U1 |
| 1 | STP60NF06L | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SW_Push | custom-parts:SW_PUSH_6mm_H13mm_No-Pad_Top-Right | SW5 |
| 1 | SW_Push | custom-parts:SW_PUSH_6mm_H13mm_No-Pad_Top-Left | SW6 |
| 1 | SW_SPDT | custom-parts:SW_Slide_SPDT_Angled_CK_OS102011MA1Q_Protruding | SW7 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | OLED-15W-C1 |
| 1 | ~ | custom-parts:DFplayer-Mini | DFPlayerMini1 |
Similar boards
- 4 layers144 × 83.5 mm
Ebrake1
wayri/SPIKE
PCB-focused multiphysics simulation, from board to complete assembly: PI, SI, circuits, thermal, EM/RF and mechanical workflows, with MCAD collaboration and a roadmap toward large-scale coupled assemblies.
141 parts17 - 2 layers83.2 × 161.9 mm
- 2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16 - 2 layers70 × 90 mm
- 2 layers44.9 × 26 mm
Mcu module
caustic-lt-system/caustic-public
This repository contains public parts of Caustic lasertag system project. Schematics and PCBs are licensed under GPLv2 license.
22 parts1 - 2 layers100 × 120.3 mm
- 4 layers102 × 86 mm
Questions
What parts does the SmartEggTimer use?
66 parts, built around the STM32F103RET6, AP7361C-33E, EC12E24204A2 and STP60NF06L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SmartEggTimer KiCad files?
From the meierh/Embedded_System_Hands_On_I repository on GitHub, at the commit this page was made from: the board is Project/PCB/smartEggTimer.kicad_pcb and its schematic Project/PCB/smartEggTimer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SmartEggTimer design in my own project?
Its repository states no licence, so its author keeps all rights: ask meierh before reusing the design.