
PopBumperController
meh2481/picopinball
Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet

Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet
ScoreController is an open-source printed circuit board by meh2481, from the meh2481/picopinball repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 70.3 × 60 mm with 23 parts on 40 nets, routed with 216 tracks and 29 vias.
Its parts include 15 connectors and 1 IC. It belongs with the RP2040 boards of this library.
Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J2, J6, J9, J11, J13, J15 |
| 5 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3, J8, J10, J12, J14 |
| 4 | MountingHole_3.2mm_M3_ISO7380_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | HOLE1, HOLE1, HOLE2, HOLE2 |
| 3 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | SHFT1, SHFT2, U2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_01x11 | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J4 |
| 1 | Conn_01x12 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-12-2.54_1x12_P2.54mm_Horizontal | J5 |
| 1 | Pico | RPi_Pico:RPi_Pico_SMD_TH | U1 |

meh2481/picopinball
Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet

meh2481/picopinball
Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet

meh2481/picopinball
Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet

meh2481/picopinball
Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet

meh2481/picopinball
Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards






Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
It measures 70.3 × 60 mm and has 2 copper layers, 1.6 mm thick.
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the meh2481/picopinball repository on GitHub, at the commit this page was made from: the board is KiCad/ScoreController/ScoreController/ScoreController.kicad_pcb and its schematic KiCad/ExpansionBoard/ExpansionBoard/ExpansionBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).