2 layers26 × 20 mm
AuxFanController
medo64/AuxFanController
Standalone fan controller using local temperature measurement
12 parts
2 layers80 × 16 mm
PlungerDriver
medo64/PlungerDriverDriver board for solder paste syringe plunger
- Size
- 80 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 22
- Pads
- 117
- Tracks, vias
- 340, 32
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Sep 2023
- Updated
- 2 Sep 2024
Overview
PlungerDriver is an open-source printed circuit board by medo64, from the medo64/PlungerDriver repository on GitHub. It is a 2-layer board of 80 × 16 mm with 39 parts on 22 nets, routed with 340 tracks and 32 vias.
It is built around the TB67H450AFNG,EL, AS78L05RTR and B260S1F. Its parts include 13 resistors, 12 capacitors, 3 connectors, 2 ICs and 2 switches.
Main components
3
TB67H450AFNG,EL
HSOP-8_EP-40℃~+85℃ 3A 600mΩ Interleaved conduction protection、Current sensing/regulation function、Active braking function Yes HSOP-8_EP Brushed DC Motor Drivers ROHSToshibaBrushed DC Motor Drivers
AS78L05RTR
SOT-89-3L-40℃~+125℃@(Tj) 1 1.7V 100mA 20V 49dB@(120Hz) 5V Fixed Positive SOT-89-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B260S1F
SOD-123F-55℃~+150℃ 1 Independent 200uA@60V 2A 50A 60V 650mV@2A SOD-123F Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdPlungerDriver
Small motor driver intended for mounting on syringe in order to push solder or flux paste out,
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Medo64:R (0805) | R5, R6, R7, R8, R9, R10, R11 |
| 6 | 10u | Medo64:C (0805) | C7, C8, C9, C10, C11, C12 |
| 3 | 100n | Medo64:C (0805) | C1, C2, C3 |
| 2 | 1K | Medo64:R (0805) | R3, R4 |
| 2 | 1u | Medo64:C (0805) | C5, C6 |
| 2 | 5K1 | Medo64:R Optional (0805) | R12, R13 |
| 1 | 16F1454 | Medo64:U Micro PIC16F1454 (TSSOP-14) | U1 |
| 1 | 1R | Medo64:R (0805) | R1 |
| 1 | 200mA | Medo64:F (0805) | F1 |
| 1 | 390R | Medo64:R (0805) | R2 |
| 1 | 470n | Medo64:C (0805) | C4 |
| 1 | ACT | Medo64:DS (0805) | DS1 |
| 1 | AS78L05RTR | Medo64:VR Linear AP7380-33Y' (SOT89-3) | VR1 |
| 1 | B260S1F | Medo64:D Shottky (SOD123F) | D1 |
| 1 | I2C OLED 128x32 | Medo64:DS OLED 128x32 I2C (4w) | DS2 |
| 1 | MC 1,5/2 | Medo64:J Phoenix MC (2w) | J1 |
| 1 | Medo64 | Medo64:ICON Medo64 | ICON |
| 1 | Microchip PIC | Medo64:ICSP PIC Pogo (5w) | ICSP |
| 1 | Rotary | Medo64:S Rotary Switch (5w) | S1 |
| 1 | S2B-PH | Medo64:J JST PH S (2w) | J3 |
| 1 | SPST | Medo64:S Tactile SPST-NO 12V 50mA 6.0x3.5x5.0mm (2w) | S2 |
| 1 | TB67H450AFNG | Medo64:U Driver Motor TB67H450AFNG' (SOIC-8) | U2 |
| 1 | locked | Medo64:J JST XH S (2w) | J2 |
Similar boards
- 2 layers24 × 36 mm
DCDCTypeC
medo64/Electronics.Test.DcDcTypeC
Mini test board providing 5V output from 20V TypeC
25 partsMIT - 2 layers93 × 64 mm
HWE Uebungen Roboter
Linos-crypto/HWE_Uebungen_Roboter
einf an roboter wo mir in hwe übungen machen
40 parts - 2 layers63.9 × 62.3 mm
Modulo Drivers
Pierini-Franco/Repositor_Automatico
The React app provides a way to order multiple products in a single order. At the same time, employees can order a single product
31 parts1 - 2 layers24.4 × 24.4 mm
OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
39 parts2.1k - 2 layers100 × 33.5 mm
Breakout 48pin 174917-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
39 parts1.2k - 2 layers33 × 26 mm
VL53L1x pwm
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 2 layers43.4 × 18.8 mm
Usb sniffer lite
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
39 parts706BSD-3-Clause
Questions
How big is the PlungerDriver PCB?
It measures 80 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PlungerDriver use?
39 parts, built around the TB67H450AFNG,EL, AS78L05RTR and B260S1F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PlungerDriver KiCad files?
From the medo64/PlungerDriver repository on GitHub, at the commit this page was made from: the board is hardware/src/PlungerDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PlungerDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask medo64 before reusing the design.