

This is an excellent intro to the platform: GPIO, serial printing, ADC libDaisy ref docs
- Size
- 48.5 × 111 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 49
- Pads
- 112
- Tracks, vias
- 40, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Feb 2024
- Updated
- 20 Mar 2025
Overview
2CQ is an open-source printed circuit board by mdjones, from the mdjones/EmHonaiseDaisySP repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.5 × 111 mm with 17 parts on 49 nets, routed with 40 tracks and 0 vias.
Its parts include 2 switches and 1 IC.
README
README.mdEmHonaise DaisySP
Purpose
A place to support DaisySP development.
This is an excellent intro to the platform: GPIO, serial printing, ADC libDaisy ref docs
Setup
How to setup your enviornment for DaisySP dev.
See DaisyWiki for setting up your development enviornment.
- Build the DaisySP submodules
make- Install the toolchain tools
The tool chain are build utilities needed for DaisySP dev. You are likely to have a few of them already. Electrosmith also provides utilities to install them for you.
- Create your module
Boards: patch_sm,seed
./helper.py create ./projects/MyDSPProj --board patch_smBuild
For each example directory do the following after Flashing the Daisy via USB.
make clean ; make ; make program-dfuParts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | EURO_JACK | ES_Daisy_Patch_SM_FB_Rev1:S_JACK | J_CV1, J_CV2, J_CV3, J_CV4, J_CV5, J_CV6, J_CV7, J_CV8 |
| 4 | M-10K-B-D | ES_Daisy_Patch_SM_FB_Rev1:9MM_SNAP-IN_POT_SILK | VR1, VR2, VR3, VR4 |
| 1 | ES_DAISY_PATCH_SM_REV1 | ES_Daisy_Patch_SM_FB_Rev1:ES_DAISY_PATCH_SM_REV1 | U1 |
| 1 | EURORACK_POWERHEADER | ES_Daisy_Patch_SM_FB_Rev1:EURORACK_POWER_SHROUD_LOCK | EP1 |
| 1 | SSD1306_96_128_64_7P | 2CQ:128x64_0.96_Disp_Module | DS1 |
| 1 | TAC_SWITCH_PTH | ES_Daisy_Patch_SM_FB_Rev1:TL1105SPF250Q_SILK | S1 |
| 1 | TOGGLE_ON-ON | ES_Daisy_Patch_SM_FB_Rev1:TOGGLE_ON-ON | SW1 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the 2CQ PCB?
It measures 48.5 × 111 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2CQ use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2CQ KiCad files?
From the mdjones/EmHonaiseDaisySP repository on GitHub, at the commit this page was made from: the board is projects/2CQ/hardware/KiCad/carrier/2CQ.kicad_pcb and its schematic projects/2CQ/hardware/KiCad/carrier/2CQ.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2CQ design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).