Skip to the content
2 layers68.6 × 96.5 mmMotor, the printed circuit board in 3D

Electronics for highly modified pypilot motor in my other repository

Size
68.6 × 96.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
44
Pads
107
Tracks, vias
206, 12
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
20 Dec 2019
Updated
24 Dec 2019

Overview

Motor is an open-source printed circuit board by McNugget6750, from the McNugget6750/pypilot-motor-electronics repository on GitHub. It is a 2-layer board of 68.6 × 96.5 mm with 27 parts on 44 nets, routed with 206 tracks and 12 vias.

Its parts include 18 resistors, 7 connectors and 1 capacitor. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

pypilot-motor-electronics

Electronics for highly modified pypilot motor in my other repository

I spend the better part of a month to understand and rewrite major parts of the original pypilot motor controller code originally created by seandepagnier moderating the http://forum.openmarine.net/forumdisplay.php?fid=18 forum.

He did an amazing job pulling all these different software packages of OpenPlotter together and creating and maintaining the majority of them as far as I understand. However, the motor controller code needed some work and the controller hardware and h-bridge support needed polishing. I hope I was able to do both.

Design decisions:

  • single sided
  • hand assembly must be easy
  • easy to understand schematics
  • support for all sensors and switches originally supported by Sean's code
  • additional display for debugging and state information

Parts

27
QtyValueFootprintReferences
51kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR6, R7, R8, R9, R10
52k2Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2, R3, R4, R5
34k7Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR16, R17, R18
2120kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR11, R12
247kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR13, R14
1100nCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1
122kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR15
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1BatteryConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1Controller TemperatureConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1IBT_2 H-BridgeConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4
1Motor TemperatureConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1RS232 and PowerConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3
1Rudder SensorConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ7
1TFT Display 128x160Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ2

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the Motor PCB?

It measures 68.6 × 96.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Motor use?

27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Motor KiCad files?

From the McNugget6750/pypilot-motor-electronics repository on GitHub, at the commit this page was made from: the board is Motor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Motor design in my own project?

Its repository states no licence, so its author keeps all rights: ask McNugget6750 before reusing the design.