mcg56/remote-high-side-switchRemote pcb is an open-source printed circuit board by mcg56, from the mcg56/remote-high-side-switch repository on GitHub. It is a 2-layer board of 40 × 41 mm with 36 parts on 54 nets, routed with 279 tracks and 25 vias.
It is built around the ESP32-C3-MINI-1-N4, BTS70082EPAXUMA1 and SPX3819M5-L-3-3, with the USBLC6-2SC6, B5819W-TP and TYPE-C-31-M-12 among its other parts. Its parts include 12 resistors, 8 capacitors, 6 ICs, 4 diodes and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Connect to WiFI and enter IP address 192.168.4.1
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6 |
| 5 | 5k1 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R7, R8 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | B5819W-TP | Library:SOD3716X135N | D1, D3 |
| 2 | Tactile_Switch | custom_components:Tactile Switch | U5, U6 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | BTS70082EPAXUMA1 | Library:SOP65P600X115-15N | U3 |
| 1 | ESP32-C3-MINI-1-N4 | Library:XCVR_ESP32-C3-MINI-1-N4 | U1 |
| 1 | Green PWR LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Red Status LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J2 |
| 1 | TYPE-C-31-M-12 | footprints:HRO_TYPE-C-31-M-12 | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
It measures 40 × 41 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the ESP32-C3-MINI-1-N4, BTS70082EPAXUMA1, SPX3819M5-L-3-3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mcg56/remote-high-side-switch repository on GitHub, at the commit this page was made from: the board is Electrical/remote_pcb/remote_pcb.kicad_pcb and its schematic Electrical/remote_pcb/remote_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mcg56 before reusing the design.
NilsEngelbach/air-quality-pcb
Seventh iteration: ESP8266 → ESP32-C3 (native USB, no UART bridge), fixes from the v6 design review, right-angle switches with longer actuators, a STEMMA QT port for optional sensors, and charge-status sensing.
okbrainhq/sMove
Applied to power.kicadsch, compute.kicadsch and smove-r2-main.kicadsch:
atomicra1n/wifi-geiger-counter
A DIY Geiger counter PCB which can detect ionizing radiation and log readings over Wi-Fi. Built with an ESP32, and a HV multiplier circuit that steps up 3.7V to 400V for the GM tube.
RileyMcCarthy/pcb-space
Zener-style compiler for PCB placement and routing: AI writes Place/NetReq, geometry is compiled, KiCad is the backend.
RobbyV2/smart_latch_lock
A self-closing bike lock built as a clamshell ring. A fixed arc bolts to the housing, a hinged arc swings 180 degrees to meet it, and a worm gearmotor closes the loop around the frame and rim on a button press or a BLE…
kushurox/fiddlesticks_pcb
This project is open for learning purposes. Check the LICENSE file for details.
vagarthgaurav/ESP32-C3-breakout-board
A simple breakout board for the ESP32-C3 Microcontroller. It uses a chip antenna for wifi and bluetooth. It has an RGB LED on pin 10.