

N scale pu
- Size
- 48 × 28 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 47
- Nets
- 44
- Pads
- 180
- Tracks, vias
- 214, 75
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jul 2023
- Updated
- 27 Oct 2026
Overview
N scale pu is an open-source printed circuit board by McbeEringi, from the McbeEringi/pcb-stuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 48 × 28 mm with 47 parts on 44 nets, routed with 214 tracks and 75 vias.
It is built around the ATTINY1604-SSF, AM2837 and CH340E, with the AP7375-50Y, CH221K and WS2812B-2020 among its other parts. Its parts include 11 capacitors, 9 resistors, 9 diodes, 6 ICs and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATTINY1604-SSF
SOIC-14-40℃~+125℃ 10bit 12 16KB 16MHz 1KB 2.7V~5.5V 256Byte 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AM2837
SOP-8SOP-8 Motor Driver Boards, Modules ROHSAMtekMotor Driver Boards, ModulesCH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersAP7375-50Y
SOT-89-40℃~+125℃@(Tj) 1 2.1uA 300mA 350mV@(100mA) 45V 5V 85dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedUncategorisedCH221K
SOT-23-6-40℃~+105℃ 100W 5V、9V、12V、15V、20V PD 3.0 Power Receiver Controller SOT-23-6 USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB PDWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D2, D3, D4, D5, D6, D7, D8, D9 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C4, C10, C11 |
| 4 | SW_Push | Library:alps-skr[gp] | SW1, SW2, SW3, SW4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R8, R9 |
| 3 | 47u | Capacitor_SMD:C_1210_3225Metric | C7, C8, C9 |
| 2 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R4, R7 |
| 2 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | Library:PCB.MCBEERINGI.DEV_small | ||
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | AM2837 | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | U6 |
| 1 | AP7375 | Package_TO_SOT_SMD:SOT-23-3 | U2 |
| 1 | AQM0802A-RN-GBW | Library:AQM0802A-RN-GBW | U5 |
| 1 | ATtiny1604-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | Buzzer | Library:PKLCS1212E4001-R1 | BZ1 |
| 1 | CH221K | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | GND | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | LOGO | Library:mcbeeringi_icon_10mm | |
| 1 | OUT_A | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | OUT_B | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | SK6112-SIDE-RG-A | Library:SK6112-SIDE-RG-A | D1 |
| 1 | UPDI | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J1 |
More from McbeEringi/pcb-stuff
12- 2 layers100 × 90 mm

- 2 layers95 × 100 mm

- 2 layers100 × 86 mm

- 2 layers100 × 100 mm

- 2 layers48 × 73 mm

- 2 layers92.5 × 98.4 mm

- 2 layers100 × 100 mm

- 2 layers100 × 99 mm

- 2 layers94 × 95.2 mm

- 2 layers44 × 44 mm

- 2 layers100 × 75 mm

- 2 layers24 × 49 mm

Similar boards
- 2 layers84 × 69 mm

Pippitank engine
garypippi/pippitank
R1 = 67kΩ (47kΩ + 20kΩ) R2 = 10kΩ (8.4V時 1.091V、6.0V時 0.779V)
82 partsMIT - 2 layers95 × 95 mm

- 2 layers218 × 98.8 mm

- 2 layers97 × 72 mm

ESP32C3-miniMAS
syamei0/Y.maku
左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応
70 parts - 4 layers25 × 14.5 mm

- 4 layers100 × 27 mm

Props board v3
ephemeridis/props_board
ESP32 based control board for costumes and props featuring USB PD enabled charging
188 partsGPL-3.0 - 2 layers90 × 70 mm

- 4 layers90 × 50 mm

Questions
How big is the N scale pu PCB?
It measures 48 × 28 mm and has 2 copper layers, 1 mm thick.
What parts does the N scale pu use?
47 parts, built around the ATTINY1604-SSF, AM2837, CH340E and AP7375-50Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the N scale pu KiCad files?
From the McbeEringi/pcb-stuff repository on GitHub, at the commit this page was made from: the board is proj/avr/n_scale_pu/n_scale_pu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the N scale pu design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).