2 layers100 × 90 mm
2 layers100 × 19 mm
8x1 ext
McbeEringi/pcb-stuff2- Size
- 100 × 19 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 62
- Pads
- 231
- Tracks, vias
- 1,146, 199
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jul 2023
- Updated
- 27 Oct 2026
Overview
8x1 ext is an open-source printed circuit board by McbeEringi, from the McbeEringi/pcb-stuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 19 mm with 42 parts on 62 nets, routed with 1,146 tracks and 199 vias.
It is built around the CH340E, 74HC595 and TS5A23159DGSR. Its parts include 16 resistors, 14 ICs, 4 capacitors, 3 connectors and 1 diode.
Main components
3
CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
TS5A23159DGSR
VSSOP-10-0.5mm-40℃~+85℃ 1.1Ω 1.65V~5.5V 100MHz 15ns 2 20ns 2:1 VSSOP-10-0.5mm Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | D168K | Display_7Segment:D1X8K | U3, U4, U5, U6, U7, U8, U9, U10 |
| 3 | 4k7 | Resistor_SMD:R_0603_1608Metric | R13, R14, R15 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 74HC595 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1, U2 |
| 2 | I2C | Connector_JST:JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J2, J3 |
| 1 | Library:PCB.MCBEERINGI.DEV_small | ||
| 1 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | AVR_CTL | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U14 |
| 1 | AVR_DISP | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U12 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LED_TNOW | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LOGO | LOGO | G*** |
| 1 | NC | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | R_TNOW | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | SW_Push | Library:alps-skrp | SW1 |
| 1 | TS5A23159DGS | Package_SO:VSSOP-10_3x3mm_P0.5mm | U13 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
More from McbeEringi/pcb-stuff
12- 2 layers95 × 100 mm
- 2 layers100 × 86 mm
- 2 layers100 × 100 mm
- 2 layers48 × 73 mm
- 2 layers92.5 × 98.4 mm
- 2 layers100 × 100 mm
- 2 layers100 × 99 mm
- 2 layers94 × 95.2 mm
- 2 layers44 × 44 mm
- 2 layers100 × 75 mm
- 2 layers24 × 49 mm
Similar boards
- 4 layers72 × 47 mm
- 4 layers144.3 × 143.8 mm
- 4 layers155 × 103 mm
- 4 layers62.9 × 88.6 mm
Bit block
Citrullin/Sovereign_Bunny_Stack
From web 3 unicorn fantasy to federated web 2.5 reality.
169 parts4 - 2 layers70 × 140 mm
FreeBot main v1.1b
KULeuven-CapBot/ICRA2025_BatteryFreeRobot
CapBot's hardware is designed using KiCad, the design files are provided under HardwareDesign.
194 parts3 - 2 layers66 × 119.3 mm
HW Radar
DennisRathgeb/doppler-radar-detector
24 GHz CW Doppler + FMCW radar detector: STM32F429 + ESP32 + TouchGFX live UI, CMSIS-DSP FFT, FastAPI backend, YOLOv8 angle-of-arrival sensor fusion desktop app. ZHAW PM4 team project.
117 parts1MIT - 2 layers88.9 × 77.5 mm
- 4 layers120 × 80 mm
Questions
How big is the 8x1 ext PCB?
It measures 100 × 19 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 8x1 ext use?
42 parts, built around the CH340E, 74HC595 and TS5A23159DGSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8x1 ext KiCad files?
From the McbeEringi/pcb-stuff repository on GitHub, at the commit this page was made from: the board is proj/light/7seg/8x1_ext/8x1_ext.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8x1 ext design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).