2 layers270 × 12.4 mm
Light strip
mbouyer/led_ceiling_light-split
a LED light with split power and led strip
15 partsBSD-2-Clause
2 layers105 × 44 mm
a LED light with split power and led strip
- Size
- 105 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 11
- Pads
- 51
- Tracks, vias
- 99, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Feb 2023
- Updated
- 25 Apr 2023
Overview
Power is an open-source printed circuit board by mbouyer, from the mbouyer/led_ceiling_light-split repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 105 × 44 mm with 19 parts on 11 nets, routed with 99 tracks and 0 vias.
It is built around the AL8861Y, SMBJ16A and BSS123. Its parts include 4 capacitors, 4 resistors, 4 diodes, 3 connectors and 1 IC.
Main components
3
AL8861Y
SOT-89-5-40℃~+85℃ 1 1.5A 1MHz 4.5V~40V 5% Analog、PWM Buck Built-in DC-DC Over-Temperature Protection (OTP)、Short-Circuit Protection SOT-89-5 LED Drivers ROHSDiodes IncorporatedLED Drivers
SMBJ16A
DO-214AA(SMB)16V 19.7V 23.08A 26V 5uA 600W@10/1000us IEC 61000-4-2 TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
BSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdled_ceiling_light-split
Plafonier à LEDs 12V pour bateau, avec 2 puissances (puissance réduite en navigation). Version en deux parties de led_ceiling_light
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Screw_Terminal_01x02 | local:amphenol_TZ02 | J1, J2, J3 |
| 2 | 976K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | SMBJ16A | Diode_SMD:D_SMB_Handsoldering | D3, D4 |
| 1 | 0.3Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 100n | local:C_filter_0805 | C4 |
| 1 | 100nF25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 10µF25V | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C3 |
| 1 | 1M | Potentiometer_THT:Potentiometer_Piher_PT-10-V10_Vertical | RV1 |
| 1 | 1µF 25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 2.7V | Diode_SMD:D_MiniMELF_Handsoldering | D1 |
| 1 | 68µH | Inductor_SMD:L_Taiyo-Yuden_NR-80xx_HandSoldering | L1 |
| 1 | AL8861 | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U1 |
| 1 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SL04-GS08 | Diode_SMD:D_SMF | D2 |
Questions
How big is the Power PCB?
It measures 105 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power use?
19 parts, built around the AL8861Y, SMBJ16A and BSS123. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power KiCad files?
From the mbouyer/led_ceiling_light-split repository on GitHub, at the commit this page was made from: the board is hardware/power/power.kicad_pcb and its schematic hardware/light-strip/light-strip.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from mbouyer/led_ceiling_light-split
1Similar boards
- 2 layers60 × 60 mm
- 2 layers123 × 81 mm
- 2 layers120 × 90 mm
- 2 layers125 × 120 mm
- 2 layers60 × 42 mm
- 2 layers68 × 58 mm
- 4 layers160 × 99.5 mm
High Current Driver
Strathclyde-EQOP/Vernier-Current-Driver
The Vernier Current Driver is an ultra low noise, programmable, bi-polar current source. It comes in two flavours:
248 parts9CC-BY-SA-4.0 - 2 layers160 × 100 mm
Marine gps
mbouyer/marine_chartplotter
Hardware and software for an opencpn-based chartplotter
115 parts6BSD-2-Clause