

Digital thermometer using stm
STM32-based Digital Thermometer PCB designed in KiCad with Embedded C firmware.
- Size
- 96.7 × 74.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 48
- Pads
- 114
- Tracks, vias
- 257, 37
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Aug 2026
- Updated
- 1 Aug 2026
Overview
Digital thermometer using stm is an open-source printed circuit board by mayurdhang031, from the mayurdhang031/Digital-Thermometer-STM32 repository on GitHub. It is a 2-layer board of 96.7 × 74.1 mm with 19 parts on 48 nets, routed with 257 tracks and 37 vias.
It is built around the AMS1117-3.3 and LM35. Its parts include 8 capacitors, 3 resistors, 3 ICs, 2 connectors and 1 switch. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
2AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM35
TO-92UncategorisedSilicore
README
README.mdDigital Thermometer using STM32
Overview
A digital thermometer PCB designed using KiCad and based on the STM32 microcontroller. The system measures temperature using an LM35 sensor and can be integrated with a display for real-time temperature monitoring.
Features
- STM32 Microcontroller
- LM35 Temperature Sensor
- KiCad PCB Design
- 2-Layer PCB
- Embedded C Firmware
Software Used
- KiCad
- STM32CubeIDE
- Embedded C
Hardware
- STM32 Microcontroller
- LM35 Temperature sensor
- 16*2 LCD
- Resistors
- Capacitors
- Crystal Oscillator
Repository Contents
- Schematic (.kicad_sch)
- PCB Layout (.kicad_pcb)
- KiCad Project (.kicad_pro)
Author
Mayur Dhang
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C5, C6 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | 22pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C7, C8 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | LM35 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | RC1602A | Display:RC1602A | U3 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Similar boards
- 2 layers108 × 33.8 mm

- 2 layers99.6 × 50.4 mm

- 2 layers210 × 125 mm

Controller bldc
david8128/Electeam-Sharky
Firmware designed in ESP32 DEVKIT microcontroller where motor, throttle, breaks, Nextion touch screen and more systems are integrated.
73 parts2GPL-3.0 - 2 layers100 × 50 mm

Carga Electronica
kr4fty/Carga-Electronica-STM32
Desarrollo de un Sistema de Control PID para una Carga Electrónica utilizando un STM32
49 parts1 - 2 layers65 × 65 mm

SimpleTempController
profdc9/SimpleTempController
A simple Arduino temperature controller for maintaining a dry heat environment for disinfection
32 parts1 - 2 layers146.1 × 141 mm

- 2 layers

- 2 layers90 × 66 mm

SursaTensiune
CatalinSerafimescu/ZK-4KXPowerSupplyWithFan
ZK-4KX power supply enclosure with automated fan
23 parts
Questions
How big is the Digital thermometer using stm PCB?
It measures 96.7 × 74.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Digital thermometer using stm use?
19 parts, built around the AMS1117-3.3 and LM35. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Digital thermometer using stm KiCad files?
From the mayurdhang031/Digital-Thermometer-STM32 repository on GitHub, at the commit this page was made from: the board is digital thermometer using stm.kicad_pcb and its schematic digital thermometer using stm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Digital thermometer using stm design in my own project?
Its repository states no licence, so its author keeps all rights: ask mayurdhang031 before reusing the design.