

Electrical designs for a nixie-tube wristwatch.
- Size
- 27 × 10 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 22
- Pads
- 50
- Tracks, vias
- 157, 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jan 2021
- Updated
- 22 Jan 2021
Overview
Riser is an open-source printed circuit board by maxwells-daemons, from the maxwells-daemons/nixie-watch repository on GitHub, published under the MIT licence. It is a 2-layer board of 27 × 10 mm with 5 parts on 22 nets, routed with 157 tracks and 13 vias.
Its parts include 2 resistors and 1 connector. It belongs with the lEDs and displays boards of this library.
README
README.mdNixie Watch

The KiCad design files for a nixie-tube wristwatch. The mechanical design can be found at this Onshape link.
Organization
kicad/board: The primary PCB design.kicad/riser: The design for a riser board to mount nixie tubes and route their connections.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | IN-12 | riser:IN-12 | V1, V2 |
| 1 | Conn_01x20 | riser:BC075-20 | J1 |
Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the Riser PCB?
It measures 27 × 10 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Riser use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Riser KiCad files?
From the maxwells-daemons/nixie-watch repository on GitHub, at the commit this page was made from: the board is kicad/riser/riser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Riser design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).