Skip to the content
2 layers19.1 × 16.9 mmPomodoro V7 TriggerButton, the printed circuit board in 3D

Pomodoro V7 TriggerButton

MaxLell/Pomodoro_Clock

So this is basically what this device (will) is about. It will sit on my desk and ping me, when I need to take a break, and not only ping me, but rather shine a bright light at me, so that I actually get my lazy a up…

Size
19.1 × 16.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
2
Pads
7
Tracks, vias
4, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Dec 2022
Updated
17 May 2024

Overview

Pomodoro V7 TriggerButton is an open-source printed circuit board by MaxLell, from the MaxLell/Pomodoro_Clock repository on GitHub, published under the MIT licence. It is a 2-layer board of 19.1 × 16.9 mm with 2 parts on 2 nets, routed with 4 tracks and 0 vias.

Its parts include 1 connector and 1 switch.

README

README.md

Pomodoro_Clock

Why?

This device forces me to take breaks in regular intervals throughout the day. Research has shown that the brain grows tired when being forced to focus on tasks on a prolonged time. (I think everybody can also observe this in his own life). But research also shows, that if you take regular breaks, you do not deplete your mental ressources as quickly and you can focus for longer hours.

So this is basically what this device (will) is about. It will sit on my desk and ping me, when I need to take a break, and not only ping me, but rather shine a bright light at me, so that I actually get my lazy a** up and move around for a couple of minutes - day in day out. You might say: Well you can also set a timer on your smartphone and go from there, to which I reply: Yeah you can, but if you want to do that day-in, day-out, you need a lot of will power and the most perfect habits the world has ever witnessed in man-kind. I am not such a person.

And for this reason I built this device.

What?

So what is this marvelous device I am talking about? Well I am glad you are asking: It is basically a box of lights, where you can set up the interval for which you want to work (the next cycle is composed of Worktime and Breaktime). Then it will run a countdown timer.

How?

  • This project is partially also a way for myself to learn and work on a complicated challenge: I already resolved the architecture of this multi-module Architecture (using a Message Broker, so that these modules only exchange data via this Messages-Interface - Observer Pattern). Or working on the implementation of high-speed low level peripherals, which require the usage of the DMA.

Parts

2
QtyValueFootprintReferences
1Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ1
1SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1

More from MaxLell/Pomodoro_Clock

2
  • 4 layersPomodoro V1, the printed circuit board in 3D

    Pomodoro V1

    MaxLell/Pomodoro_Clock

    So this is basically what this device (will) is about. It will sit on my desk and ping me, when I need to take a break, and not only ping me, but rather shine a bright light at me, so that I actually get my lazy a up…

    155 partsMIT
  • 4 layers6.1 × 75.1 mmPomodoro V7, the printed circuit board in 3D

    Pomodoro V7

    MaxLell/Pomodoro_Clock

    So this is basically what this device (will) is about. It will sit on my desk and ping me, when I need to take a break, and not only ping me, but rather shine a bright light at me, so that I actually get my lazy a up…

    135 partsMIT

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the Pomodoro V7 TriggerButton PCB?

It measures 19.1 × 16.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pomodoro V7 TriggerButton use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pomodoro V7 TriggerButton KiCad files?

From the MaxLell/Pomodoro_Clock repository on GitHub, at the commit this page was made from: the board is Hardware/PCBA/Pomodoro_V7_TriggerButton/Pomodoro_V7_TriggerButton.kicad_pcb and its schematic Hardware/PCBA/Pomodoro_V1/Accelerometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pomodoro V7 TriggerButton design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).