Skip to the content
2 layers136.2 × 86.6 mmHDD Synth prototype MK2, the printed circuit board in 3D

HDD Synth prototype MK2

MaverickUK/HDDSynth16

Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive

Size
136.2 × 86.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
123
Pads
231
Tracks, vias
106, 4
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Jan 2023
Updated
25 Oct 2026

Overview

HDD Synth prototype MK2 is an open-source printed circuit board by MaverickUK, from the MaverickUK/HDDSynth repository on GitHub. It is a 2-layer board of 136.2 × 86.6 mm with 19 parts on 123 nets, routed with 106 tracks and 4 vias.

Its parts include 4 resistors, 3 diodes, 1 IC and 1 connector. It belongs with the audio and music boards and the RP2040 and NXP (LPC, Kinetis, i.MX RT) boards of this library.

README

README.md

HDD Synth

Logo

Recreates the sound of mechanical spinning HDDs on retro PCs that use a solid state drive.

Inspired by seeing the HDD Clicker project and wanting to more faithfully recreate the sound of old mechanical hard drives spinning up and accessing data. Because the hard drive sounds come from samples, it's possible to replace them with any hard drive recording you'd like or something completely different!

Photo of the HDD Synth MK5 beta testing PCB

Features

  • Sample based recreation of mechanical hard disk drives operating sounds
  • Spin up when PC is turned on
  • Idle hum whilst standing by
  • Access clicks and crackcles
  • Spin down when PC is turned off
  • SD card to hold multiple HDD sample packs, to recreate the sound of different mechanical hard disk drives
  • Volume control to make it very loud or silent
  • Balance to alter the amount of idle to access sounds
  • HDD detection via HDD LED
  • HDD LED to connect to your case
  • OLED screen to view activity, volume and more

Progress

Beta test is active

The MKV prototype boards are with a small group of beta testers to shake out any last issues before the boards are made available for sale.

It's been a long road, but the end is in sight

Photo of the different HDD Synth prototypes

Media

View gallery

Contact

Peter Bridger at maverickuk@gmail.com

Project website at www.strifestreams.com/hddsynth

Resources

Acknowledgments

  • Inspired by the HDD Clicker project
  • A big thanks to Ian Scott of PicoGUS fame for sharing his resource sources and knowledge of using the Pi Pico with the ISA bus which gave me the confidence to take this project to the next level
  • Marten Electric for the excellent ISA prototyping boards which made it very easy to wire up the Pico to my computer

PCBWay

Thanks to PCBWay for their PCB manufacturing and assembly services. This is my first PCB based project and they've been a great way to get quality PCB prototypes created along with component assembly at competitive prices. Recommended if you're thinking about creating a simular project yourself.

License

This project is dual-licensed:

  • Software/firmware is licensed under the GNU GPL v3.0.
  • Hardware designs (schematics, PCB files, BOM) are licensed under CC BY-NC-SA 4.0 — free for personal, non-commercial use and modification, but commercial use requires my permission.

Parts

19
QtyValueFootprintReferences
21N5817Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_AnodeUpD1, D2
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalH1, H2
11.5FCapacitor_THT:CP_Radial_D16.0mm_P7.50mmSuper_Cap1
11KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
12KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1330RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5
150RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1Bus_ISA_8bitConnector_PCBEdge:BUS_ATJ2
1Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalH4
1Conn_01x09Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalH3
1D_Zener_5.1vDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD3
1Debug_power_headerConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalH5
1LOGOCustomGraphics:HDDSynth_SmallG***
1LOGOCustomGraphics:DopefishG***
1Optocoupler_DC_PhotoNPN_AKECPackage_DIP:DIP-4_W7.62mmU1
1R_PotentiometerPotentiometer_THT:Potentiometer_Bourns_3386W_HorizontalPot1
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_UnspecifiedA1

More from MaverickUK/HDDSynth

5
  • 2 layers100.3 × 69.9 mmHDD Synth Prototype MK5, the printed circuit board in 3D

    HDD Synth Prototype MK5

    MaverickUK/HDDSynth

    Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive

    112 parts16
  • 2 layers119.4 × 97.4 mmHDD Synth prototype MK3, the printed circuit board in 3D

    HDD Synth prototype MK3

    MaverickUK/HDDSynth

    Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive

    60 parts16
  • 2 layers100.3 × 69.9 mmHDD Synth Prototype MK4, the printed circuit board in 3D

    HDD Synth Prototype MK4

    MaverickUK/HDDSynth

    Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive

    46 parts16
  • 2 layers124.5 × 85.9 mmHDD Synth ISA adapter, the printed circuit board in 3D

    HDD Synth ISA adapter

    MaverickUK/HDDSynth

    Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive

    19 parts16
  • 2 layers136.2 × 86.6 mmHDD Synth, the printed circuit board in 3D

    HDD Synth

    MaverickUK/HDDSynth

    Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive

    9 parts16

Similar boards

  • 2 layers43.9 × 27.7 mmTcd1304-4v, the printed circuit board in 3D

    Tcd1304-4v

    OpnTec/open-spectrometer-hardware

    Open source VIS spectrometer

    19 parts1.5k
  • 2 layers50 × 60 mmDebate Device, the printed circuit board in 3D

    Debate Device

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    19 parts915
  • 2 layers102.9 × 96.7 mmISA adapter, the printed circuit board in 3D

    ISA adapter

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    19 parts805
  • 2 layers60 × 39 mmPs2usb, the printed circuit board in 3D

    Ps2usb

    rasteri/HIDman

    Adapting USB devices to work on old computers

    19 parts432
  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers80 × 80 mmGB BRK CPU G1, the printed circuit board in 3D

    GB BRK CPU G1

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    19 parts379CC-BY-4.0
  • 2 layers25.4 × 25.4 mmIna169, the printed circuit board in 3D

    Ina169

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    19 parts282
  • 2 layers58.4 × 28.6 mmNew rele, the printed circuit board in 3D

    New rele

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    19 parts269

Questions

How big is the HDD Synth prototype MK2 PCB?

It measures 136.2 × 86.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HDD Synth prototype MK2 use?

19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HDD Synth prototype MK2 KiCad files?

From the MaverickUK/HDDSynth repository on GitHub, at the commit this page was made from: the board is 2_prototype_mk2/hardware/HDD Synth prototype MK2/HDD Synth prototype MK2.kicad_pcb and its schematic 2_prototype_mk1/hardware/HDD Synth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HDD Synth prototype MK2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask MaverickUK before reusing the design.