

Dk2 01
- Size
- 140 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 174
- Nets
- 159
- Pads
- 688
- Tracks, vias
- 289, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Sep 2022
- Updated
- 8 Jul 2026
Overview
Dk2 01 is an open-source printed circuit board by mattybrad, from the mattybrad/drumkid2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 140 × 108 mm with 174 parts on 159 nets, routed with 289 tracks and 9 vias.
It is built around the TL072, XL1509-5.0 and 74HC165D, with the 74HC4051, 74HC595 and AP7333-33SRG among its other parts. Its parts include 70 resistors, 31 capacitors, 18 switches, 17 ICs and 14 connectors. It belongs with the RP2040 boards of this library.
Main components
9TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierXL1509-5.0
SOIC-8-40℃~+125℃ 1 150kHz 2A 2mA 4.5V~40V 5V Buck Buck Built-in Fixed No SOIC-8 DC-DC Converters ROHSUMWDC-DC Converters74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, Multiplexers74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersAP7333-33SRG
SOT-23R-40℃~+85℃@(Ta) 1 3.3V 300mA 300mV@(300mA) 65dB@(100Hz) 65uA 6V Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-23R Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPCM5102PW
TSSOP-20-25℃~+85℃ 1 3V~3.6V Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdDrumkid 2
Aleatoric drum machine, uses random numbers to generate/alter drumbeats. This project is the successor to the original Drumkid, which was released in 2020. Drumkid 2 runs on a Raspberry Pi Pico. This repo contains both code for the Pico and PCB files.
Setup
I used the official Raspberry Pi Pico installer for Windows to set up the Pico toolchain for Visual Studio Code. Remember to update the repo's submodules. The SD card code submodule is a specific commit (v1.1.2), not the latest version. Have included the .vscode folder, which may be different on non-Windows systems?
Parts
174| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10k | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28 |
| 16 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 |
| 14 | 100k | Resistor_SMD:R_0603_1608Metric | R30, R32, R36, R38, R56, R57, R58, R59, R62, R63, R64, R65, R68, R69 |
| 12 | 10k | Library:Potentiometer_Alps_RK09K_vertical_biggerholes | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10, RV11, RV12 |
| 12 | 200R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 7 | 1k | Resistor_SMD:R_0603_1608Metric | R47, R48, R60, R61, R66, R67, R70 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C9, C10, C26, C27, C28 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C15, C20, C24 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C8, C14, C19, C30 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C13, C18, C21, C22 |
| 4 | 1n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | 240k | Resistor_SMD:R_0603_1608Metric | R29, R31, R35, R37 |
| 4 | 33k | Resistor_SMD:R_0603_1608Metric | R33, R34, R39, R40 |
| 4 | 39k | Resistor_SMD:R_0603_1608Metric | R41, R42, R45, R46 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D2, D3, D4, D5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U12, U14, U15, U16 |
| 3 | 56R | Resistor_SMD:R_0603_1608Metric | R49, R50, R51 |
| 2 | 18p | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C23, C25 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | 470R | Resistor_SMD:R_0603_1608Metric | R52, R53 |
| 2 | 5.6k | Resistor_SMD:R_0603_1608Metric | R43, R44 |
| 2 | 74HC165 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 2 | 74HC4051 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U7, U10 |
| 2 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2, U3 |
| 2 | MCP6002-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8, U9 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1, SW2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R54 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R55 |
| 1 | 180uF 35V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C31 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 1N5820 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D6 |
| 1 | 470uF 35V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C29 |
| 1 | 68uH/2A | Inductor_THT:L_Radial_D7.0mm_P3.00mm | L1 |
| 1 | AP7333-33SRG | Package_TO_SOT_SMD:SOT-23 | U11 |
| 1 | CA56-12EWA | Library:SR410361N | U4 |
| 1 | CV_In_1 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J2 |
| 1 | CV_In_2 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J3 |
| 1 | CV_In_3 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J4 |
| 1 | CV_In_4 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J5 |
| 1 | Euro_Out_1 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J6 |
| 1 | Euro_Out_2 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J7 |
| 1 | Eurorack_Power | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J14 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Micro_SD_Card | misc:YAMAICHI_MICROSD_VERTICAL | J1 |
| 1 | PCM5102 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U13 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | Sync_Input | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J8 |
| 1 | Sync_Out | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J13 |
| 1 | Trigger_Out_1 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J10 |
| 1 | Trigger_Out_2 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J9 |
| 1 | Trigger_Out_3 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J12 |
| 1 | Trigger_Out_4 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J11 |
| 1 | XL1509-5.0 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U17 |
More from mattybrad/drumkid2
6- 4 layers120 × 108 mm

- 2 layers150 × 150 mm

- 2 layers120 × 108 mm

- 2 layers120 × 108 mm

- 2 layers120 × 108 mm

- 2 layers120 × 60 mm

Similar boards
- 2 layers70 × 110 mm

Quantizer control
lennartquerter/euro-rack-synth
Lenimal Github for DIY for a Eurorack Synth
106 parts13 - 2 layers41.8 × 21.7 mm

LoRa E5
B1jam1-74/Projet_Ruche_groupe_1
Le microcontrôleur fait interface avec les capteurs (HX711 + DS18B20) et le module LoRa, qui pousse les trames vers une gateway LoRaWAN puis un serveur web.
36 partsMIT - 4 layers40 × 40 mm

- 4 layers300.8 × 110 mm

Fireflow
mcbronkowitch/fireflow
FireFlow — a modulation-first ambient groovebox: the modulation system is the instrument, not a layer on top of it. Five independent lanes per part driving a synth, granular, wavetable, resonator or bucket-brigade deck.
208 parts2MIT - 2 layers80.2 × 94.6 mm

MANUEL ARGIBAYMOLINA ELECTRONICS
ManuelArgibay/Industrial-I-O-Controller
Industrial 24V I/O controller featuring protected high-side and low-side outputs, multiplexed analog and digital inputs, and MCU-based control.
89 parts - 4 layers154.9 × 128.4 mm

Daisy hardware v1
rafkhan/lowstepper
Dual phase manipulation low frequency oscillator by Okay Synthesizer.
161 parts9 - 2 layers80.8 × 99.9 mm

Circuit board
ltrooney/diy-synth
A repository containing a handful of utilities for my DIY Eurorack-based modular synthesizer. Snippets include a virtual wavetable oscillator, a step sequencer, and more.
71 parts7 - 2 layers60.5 × 110 mm

Questions
How big is the Dk2 01 PCB?
It measures 140 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dk2 01 use?
174 parts, built around the TL072, XL1509-5.0, 74HC165D and 74HC4051. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dk2 01 KiCad files?
From the mattybrad/drumkid2 repository on GitHub, at the commit this page was made from: the board is pcb/dk2_01/dk2_01.kicad_pcb and its schematic pcb/dk2_00/cv.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dk2 01 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).