

SyncDongle
This project aims to make a Alfaskop 4110 running towards the Hercules IBM emulator and run the MEMO SW.
- Size
- 99.3 × 54.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 95
- Pads
- 168
- Tracks, vias
- 355, 26
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Aug 2019
- Updated
- 5 Apr 2022
Overview
SyncDongle is an open-source printed circuit board by MattisLind, from the MattisLind/alfaskop_emu repository on GitHub. It is a 2-layer board of 99.3 × 54.4 mm with 17 parts on 95 nets, routed with 355 tracks and 26 vias.
It is built around the MAX208CWG+T. Its parts include 11 capacitors, 3 ICs, 2 connectors and 1 switch. It belongs with the STM32 boards of this library.
Main components
1README
hardware/SyncDongle/README.mdSyncDongle

SyncDongle is a STM32F103 BluePill or STM32F4x1 Weact blackpill board that interfaces to a sync port. It has the STM32 CPU card and a couple of MAX208 RS-232 level converters, a DB25 connector, a DE9 connector and 10 pin DIP switch / wire wrap area to set various configurations of the serial port. At this point the firmware available only support the STM32F103 BluePill. Support for the Weact black pill will be added later on.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 2 | MAX208CWG | Package_DIP:DIP-24_W7.62mm_LongPads | U2, U3 |
| 1 | 10u | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | DB25_Male_MountingHoles | Connector_Dsub:DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J2 |
| 1 | DB9_Female_MountingHoles | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J1 |
| 1 | STM32BluePill | Package_DIP:DIP-40_W15.24mm_LongPads | U1 |
| 1 | SW_DIP_x10 | Package_DIP:DIP-20_W7.62mm_LongPads | SW1 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the SyncDongle PCB?
It measures 99.3 × 54.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SyncDongle use?
17 parts, built around the MAX208CWG+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SyncDongle KiCad files?
From the MattisLind/alfaskop_emu repository on GitHub, at the commit this page was made from: the board is hardware/SyncDongle/SyncDongle.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SyncDongle design in my own project?
Its repository states no licence, so its author keeps all rights: ask MattisLind before reusing the design.