4 layers65 × 55 mm
Project SAPR
Katerrrina-g/Project_SAPR
Символы (УГО): Файл UGO.kicadsym. УГО оформлены по ГОСТ.
72 parts
4 layers92 × 72.8 mm
MixedSignal
matthewychen/Magellan2nd-order Delta-Sigma ADC w/ 3B Flash sampling
- Size
- 92 × 72.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 170
- Nets
- 148
- Pads
- 507
- Tracks, vias
- 1,226, 272
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Jun 2026
- Updated
- 11 Aug 2026
Overview
MixedSignal is an open-source printed circuit board by matthewychen, from the matthewychen/Magellan repository on GitHub. It is a 4-layer board of 92 × 72.8 mm with 170 parts on 148 nets, routed with 1,226 tracks and 272 vias.
It is built around the CDCLVC1108PW, ADCMP602BRMZ and ADG734BRU, with the AP2112K-3.3TRG1, TPS7A3001DGNR and TPS7A4901DGNR among its other parts. Its parts include 62 capacitors, 36 resistors, 19 ICs, 5 connectors and 2 diodes.
Main components
6
CDCLVC1108PW
TSSOP-16-40℃~+85℃ 1 2.3V~3.6V 250MHz 8 TSSOP-16 Clock Buffers, Drivers, Distributors ROHSTexas InstrumentsClock Buffers, Drivers, Distributors
ADCMP602BRMZ
MSOP-8-40℃~+125℃ 1 100uV 2.5V~5.5V 2000nA 3.5mA 3.5ns 50dB 5mV 5uA Rail-to-Rail Input, Rail-to-Rail Output TTL、CMOS MSOP-8 Comparators ROHSAnalog DevicesComparators
ADG734BRU
TSSOP20CMOS, 2.5 Ohms Low Voltage, Quad SPDT SwitchAnalog DevicesUncategorised
AP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TPS7A3001DGNR
HVSSOP-8-40℃~+125℃@(Tj) 1 1.18V~33V 15.1uVrms 200mA 216mV@(100mA) 36V 55uA 72dB@(120Hz) Adjustable Negative Over Current Protection、Enable、Thermal Shutdown HVSSOP-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TPS7A4901DGNR
HVSSOP-8-40℃~+125℃@(Tj) 1 1.194V~33V 15.4uVrms 150mA 260mV@(100mA) 35V 49uA 72dB@(120Hz) Adjustable Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable HVSSOP-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
170| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | 0.1µF Ceramic | Capacitor_SMD:C_0603_1608Metric | C3, C16, C17, C21, C22, C23, C24, C26, C27, C29, C30, C31, C32, C33, C34, C35 +29 |
| 42 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +26 |
| 10 | 10µF Ceramic | Capacitor_SMD:C_0805_2012Metric | C2, C6, C13, C14, C15, C18, C19, C20, C59, C60 |
| 8 | 100 | Resistor_SMD:R_0603_1608Metric | R29, R30, R31, R32, R33, R34, R35, R36 |
| 7 | 14k | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R15, R16, R17, R18 |
| 7 | 7.32k | Resistor_SMD:R_0603_1608Metric | R21, R22, R23, R24, R25, R26, R27 |
| 7 | ADCMP602BRMZ | Package_SO:MSOP-8_3x3mm_P0.65mm | U10, U11, U12, U13, U14, U15, U16 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R6 |
| 4 | ADG734 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5, U6, U8, U9 |
| 3 | 100µF Electrolytic | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C8, C10 |
| 2 | 1.5k | Resistor_SMD:R_0603_1608Metric | R11, R19 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 100pF | Capacitor_SMD:C_0603_1608Metric | C25, C28 |
| 2 | 12k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 13k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 150 | Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P25.40mm_Horizontal | R37, R38 |
| 2 | ADAFRUIT 1992 (Tall) | FemaleConnector:CONN_PPPC202LFBN-RC_SUL | J1, J2 |
| 2 | Ferrite Bead | Diode_SMD:D_0603_1608Metric | FB1, FB2 |
| 2 | OPA1612AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U7 |
| 2 | STATUS | Diode_SMD:D_0603_1608Metric | D1, D2 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 1µF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | AP2112K-3.3TRG1 | 3.3VLDO:SOT_RG1_DIO | U4 |
| 1 | B2B-XH-ALFSN | B2BHeader:CONN_B2B-XH-ALFSN_JST | J5 |
| 1 | CDCLVC1108PW | ClockDistributer:PW0016A_M | U18 |
| 1 | DIN5 Connector | DIN5 Connector:CONN5_SDS-50J_CUD | J4 |
| 1 | Input Audio Jack | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J3 |
| 1 | REF5025AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | TPS7A3001DGNR | TPS7A49:DGN8_1P89X1P57 | U9LDO1 |
| 1 | TPS7A4901DGNR | TPS7A49:DGN8_1P89X1P57 | U10LDO1 |
| 1 | WE-TVS-82400102 TVS Diode Array (to protect against static discharge) | Package_TO_SOT_SMD:SOT-23-6 | U2 |
The 168 most common of 170 parts.
Questions
How big is the MixedSignal PCB?
It measures 92 × 72.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MixedSignal use?
170 parts, built around the CDCLVC1108PW, ADCMP602BRMZ, ADG734BRU and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MixedSignal KiCad files?
From the matthewychen/Magellan repository on GitHub, at the commit this page was made from: the board is MixedSignal/MixedSignal.kicad_pcb and its schematic MixedSignal/3bflashadc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MixedSignal design in my own project?
Its repository states no licence, so its author keeps all rights: ask matthewychen before reusing the design.
Similar boards
- 4 layers110 × 61.8 mm
- 4 layers100 × 85 mm
- 4 layers175 × 185 mm
Power
pratham-cloud-ctrl/Project-SCCI-RH
A digital spinal cord-computer interface concept: research, eight KiCad boards, nRF5340 firmware and FreeCAD assemblies.
160 parts - 6 layers66.4 × 66.5 mm
NU180
NuZondar/NU180
A reverse-engineered replacement for the U180 hybrid in the HPAK 3458A DVM.
115 parts10 - 2 layers230.4 × 233.5 mm
- 2 layers87 × 45 mm
- 2 layers50 × 58 mm
HS2026-1D curvature
cornell-happi-lab/HS2026-1D-curvature
Surface curvature affects tactile sensor's reading but is often not considered in the calibration process. We propose a curvature-aware calibration pipeline, with full resources (STL, schematics, code, and guides) for…
27 parts1MIT