2 layers56.6 × 70 mm
2 layers85 × 65 mm
- Size
- 85 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 50
- Pads
- 119
- Tracks, vias
- 180, 55
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 Jan 2024
- Updated
- 3 May 2024
Overview
ESP32 is an open-source printed circuit board by matthewrylander, from the matthewrylander/ECE445WasteBinMonitor repository on GitHub. It is a 2-layer board of 85 × 65 mm with 26 parts on 50 nets, routed with 180 tracks and 55 vias.
It is built around the ESP32-S3-WROOM-1-N16R2. Its parts include 8 resistors, 5 capacitors, 2 ICs and 2 switches. It belongs with the ESP32 boards of this library.
Main components
1Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C3, C5 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | AZ1117-3.3 | local_footprints:AZ1117C-TO252-2 | U1 |
| 1 | Conn_01x05 | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | MicroUSB_5V1A_Wall1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | USB_UART1 |
| 1 | ESP32-S3-WROOM-1-N16R2 | local_footprints:ESP32-S3-WROOM-1_EXP | U2 |
| 1 | F_Header_Temp | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | DHT22 |
| 1 | F_Header_Ultrasonic | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | HC-SR4 |
| 1 | MQ-135 | Sensor:MQ-6 | MQ135 |
Questions
How big is the ESP32 PCB?
It measures 85 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 use?
26 parts, built around the ESP32-S3-WROOM-1-N16R2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 KiCad files?
From the matthewrylander/ECE445WasteBinMonitor repository on GitHub, at the commit this page was made from: the board is Sensor Board v3.0/Sensor Board/ESP32.kicad_pcb and its schematic Hub Board/ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask matthewrylander before reusing the design.
More from matthewrylander/ECE445WasteBinMonitor
1Similar boards
- 4 layers95 × 55.5 mm
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 4 layers45.7 × 90.3 mm
- 4 layers146.1 × 55 mm
StarGate MainBoard
plhsystems/stargate-mainboard-esp32
Mainboard for Kristian's stargate projects, based on ESP32-S3
171 parts4 - 2 layers112.7 × 121.4 mm
- 2 layers88.5 × 71.5 mm
MSolarWeather
cfdev/mSolarWeather
This project use the SparkFun weather meter kit and other sensors
96 parts1MIT - 4 layers32 × 45 mm
PumpV2schematic
mattgp32/Low-Cost-Insulin-Pump-V2.1
A repository to store all the software files used for the BT Insulin Pump
90 parts1 - 4 layers
- 4 layers257 × 117.5 mm
Teacup carrier
thingino/teacup-neo
Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.
157 parts1GPL-3.0