2 layers153.5 × 35 mm
Audio over Cat5 (XLR Combo Female)
PKCubed/RJ45XLR
A simple, robust PCB that allows a shielded twisted pair category cable (Cat5e, Cat6a, etc.) to take the place of up to four heavy XLR cables.
10 parts
4 layers227 × 40 mm
Anyboard
mattclarkdotnet/anyboardAny to any passive patch panel
- Size
- 227 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 3
- Pads
- 60
- Tracks, vias
- 73, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Apr 2025
- Updated
- 29 Apr 2025
Overview
Anyboard is an open-source printed circuit board by mattclarkdotnet, from the mattclarkdotnet/anyboard repository on GitHub. It is a 4-layer board of 227 × 40 mm with 11 parts on 3 nets, routed with 73 tracks and 0 vias.
It is built around the NC3MAH and NCJ6FA-H. Its parts include 8 connectors and 1 switch.
Main components
2Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H1, H2 |
| 2 | NC3MAH | Connector_Audio:Jack_XLR_Neutrik_NC3MAH_Horizontal | J8, J9 |
| 2 | NCJ6FA-H | Connector_Audio:Jack_XLR-6.35mm_Neutrik_NCJ6FA-H_Horizontal | J2, J4 |
| 1 | AudioJack3 | anyboard:FC68131_CLF | J5 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | PSG01551 | anyboard:PSG01551_PRO | J1 |
| 1 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | Screw_Terminal_01x03 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J3 |
Questions
How big is the Anyboard PCB?
It measures 227 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Anyboard use?
11 parts, built around the NC3MAH and NCJ6FA-H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Anyboard KiCad files?
From the mattclarkdotnet/anyboard repository on GitHub, at the commit this page was made from: the board is board/anyboard.kicad_pcb and its schematic board/anyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Anyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask mattclarkdotnet before reusing the design.
Similar boards
- 4 layers51.4 × 21.1 mm
- 2 layers131.8 × 51.8 mm
Bridge
nichtrami/led_tube
A LED Tube that works wireless and runs on a ESP32 with Arduino Framework
17 parts1Apache-2.0 - 2 layers188 × 128 mm
- 2 layers
PassiveSummingPackv2
zacharypatchen/Passive-Orchestral-Summing-Pack
The Summing Pack is a passive summing device featuring a thru-put designed to alleviate the input load on mixing boards in orchestral productions.
19 partsMIT - 2 layers380 × 45 mm
AddOnC
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
97 parts226CC-BY-SA-4.0 - 4 layers152 × 61.5 mm
- 2 layers123.9 × 111.9 mm
Modulus Macropad
advaitconty/Modulus
A keyboard, designed to be completely modular via USB Type-C ports
52 parts