

- Size
- 50 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 82
- Pads
- 262
- Tracks, vias
- 891, 83
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Oct 2015
- Updated
- 17 Feb 2016
Overview
Mmp is an open-source printed circuit board by mattbrejza, from the mattbrejza/blackmagic-isolated repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 32 mm with 65 parts on 82 nets, routed with 891 tracks and 83 vias.
It is built around the STM32F103C8T6, ROE-0505S and TXS0108EPW, with the NTR4101P among its other parts. Its parts include 22 resistors, 18 capacitors, 8 ICs, 6 diodes and 4 connectors. It belongs with the STM32 boards of this library.
Main components
4STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)ROE-0505S
SIP,11.7x6mmIsolated Power ModulesYLPTECTXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersNTR4101P
SOT-23-55℃~+150℃ 1 P-Channel 1.2V 100pF 20V 210mΩ@1.8V 3.2A 675pF 730mW 75pF 8.5nC@4.5V P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 4.7k | passives-7351:C0603-N | R5, R12, R13, R14, R16, R17, R18, R21, R22 |
| 8 | 100n | Capacitors_SMD:C_0603 | C2, C3, C5, C6, C10, C12, C18, C19 |
| 6 | 330 | passives-7351:C0603-N | R7, R8, R9, R10, R11, R20 |
| 6 | LED | LEDs:LED-0603 | D1, D2, D3, D4, D5, D6 |
| 5 | 4.7u | Capacitors_SMD:C_0603 | C7, C9, C11, C13, C14 |
| 4 | 10k | passives-7351:C0603-N | R1, R6, R15, R19 |
| 2 | 10u | Capacitors_SMD:C_0805 | C15, C17 |
| 2 | 22 | passives-7351:C0603-N | R3, R4 |
| 2 | C_Small | Capacitors_SMD:C_0603 | C1, C4 |
| 2 | MCP1700-33 | TO_SOT_Packages_SMD:SOT-23 | IC4, IC5 |
| 2 | SI8662 | SMD_Packages:SO-16-N | IC2, IC3 |
| 2 | SW_PUSH | tactile_SPST:SW_SPST_EVQPE1 | SW1, SW3 |
| 1 | 1.5k | passives-7351:C0603-N | R2 |
| 1 | 1117-SOT223 | TO_SOT_Packages_SMD:SOT-223 | IC7 |
| 1 | 1u | Capacitors_SMD:C_0603 | C8 |
| 1 | 2n2007 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | 4.7u | Inductors_NEOSID:Neosid_Inductor_SM-NE30_SMD1210 | L1 |
| 1 | CONN_01X04 | agg:SM04B-PASS | P2 |
| 1 | Crystal_Small | ABM7:ABM7 | Y1 |
| 1 | NTR4101 | TO_SOT_Packages_SMD:SOT-23 | Q2 |
| 1 | ROE-0505S | dcdc:ROE-DCDC | U2 |
| 1 | SP3T | slide_SP3T:AYZ0103AGRLC | SW2 |
| 1 | STM32F103C | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | IC1 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm | J1 |
| 1 | TC2030-CTX | Tag-Connect:TC2030-NL_SMALL | P3 |
| 1 | TXS0108 | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | IC6 |
| 1 | USB_B | Connect:USB_Mini-B | P1 |
Similar boards
- 4 layers90.2 × 95.9 mm

- 2 layers60 × 76 mm

MMS2-Gameboy Cart Adapter
Heber-co-uk/MMS2-Gameboy-Cart-Adapter
Adapter PCB for the Gameboy cartridge add-on for Multisystem2
71 partsGPL-3.0 - 2 layers112.5 × 85.5 mm

- 2 layers100 × 100 mm

MCS Control 6fa4f290d14a4191b5bd4ad91b5ee33a
Elektropac/MCS_Control
All the firmware for Control module
262 parts1 - 2 layers47.8 × 43.7 mm

- 4 layers68.6 × 53.3 mm

Icezum
FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board
218 parts357GPL-3.0 - 2 layers94.5 × 74.4 mm

Ax58100-stm32-ethercat
MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
184 parts93 - 4 layers80 × 100 mm

Baseboard
NVIDIA-AI-IOT/my-jetson-nano-baseboard
An open source Jetson Nano baseboard and tools to design your own.
240 parts91
Questions
How big is the Mmp PCB?
It measures 50 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mmp use?
65 parts, built around the STM32F103C8T6, ROE-0505S, TXS0108EPW and NTR4101P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mmp KiCad files?
From the mattbrejza/blackmagic-isolated repository on GitHub, at the commit this page was made from: the board is board/mmp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mmp design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).